The debug build logs at info level, and each line holds up the task that
logs it for ~9ms at 115200. At 921600 that drops to ~1ms. SERIAL_BAUD
defaults to 115200, so the other envs are unchanged. The ROM's boot
banner still prints at 115200 and shows as garbage in the monitor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Copied from the registry package lsatan/SmartRC-CC1101-Driver-Lib@2.5.7
(upstream unmaintained since 2021) so it can be fixed for Arduino 3.x in
the next commit. This commit is the untouched copy, so that diff shows
every change. Licence: LICENSE.txt ("permission to modify and publish").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
IDF 4.4 gets no more security fixes, and the planned RMT radio needs
IDF 5's RMT driver. See docs/adr/0003-pioarduino-idf55.md.
- Every env on one pinned pioarduino release. C6 drops its own
library list and flags but stays a debug build on huge_app.
- Release envs build at CORE_DEBUG_LEVEL=2 so the ESP32 image fits its
1.5 MB OTA slot (17 KB free); debug envs stay at 3.
- Drop the C3: its image is 76.5 KB over the OTA slot on IDF 5.5.
- CI installs pioarduino's Core and checks firmware.bin against the app
partition, failing under 8 KB free. PlatformIO's "Flash:" figure
reads ~45 KB low and passed a C3 image that doesn't fit.
- esp_task_wdt_reconfigure(): on 3.x the core already starts the watchdog
and esp_task_wdt_init() fails, so the C6 build kept the 5 s default.
- An updated firmware is kept only once it has run 60 s with the
network up; a reset before then rolls back to the previous one.
- ETH.begin() takes the 3.x argument order; Arduino 2.x branches gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both are minor updates with no API change for us. The espressif32 7.x
platform and SmartRC-CC1101-Driver-Lib 3.x major updates are left out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PR B of SHADE_BEHAVIOUR_PLAN.md. What a shade does with frames, commands,
group commands and radio events moves unchanged from SomfyShade into
ShadeBehaviour, which builds natively and is pinned by test_shadebehaviour.
ShadeBehaviour reads ShadeSettings and RemoteSettings, gets the time on
every input, and holds the motion state that other files now read through
state(). It sends through MotorLink and reports through ShadeEvents
(changes, commands, save wanted, sensor flags) as things happen.
SomfyShade wraps it: its MotorLink is SomfyRemote::sendCommandAfter, which
now leaves the sender out of the echo and radio hold because the module
hears its own frame. lastFrame stays shared with the send path.
ConfigFile writes through restore() and clearTilt(), SomfyShadeOps through
setPosition(). The pinning tests label where the copies of a rule disagree
"today:", for the reconcile phase.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The p_* setters and emitState() no longer publish or emit straight away:
they set SHADE_CHANGED_* / GROUP_CHANGED_* bits on the shade or group.
At the end of every loop() pass SomfyShadeController::sendChanges()
publishes the MQTT topics whose bits are set and sends one shadeState or
groupState, then clears the bits. emitState(evt) with an event name and
emitState(num) for one client still go out at once.
publishShadeTopics() (ShadeChanges.cpp, tested natively) writes the topics
from a shade snapshot; publishState() on connect uses it too. That fixes
MQTT position and target, a constant 50 since c94819e, and direction, a
constant 0 on connect. position and tiltPosition are now retained when
they change, as they were on connect, and a group whose flags change sends
one groupState instead of two. somfy_flags_t moves to ShadeTypes.h.
8 new native tests, 327 in all. Flash: esp32devdbg +196 bytes, esp32dev
+228 bytes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The 19 routes that changed rooms, shades, groups and repeaters on the web
server task (add, save, delete, link and unlink, setPaired, the sort
orders) now copy their request into a model_edit_t, queue it on the
LoopQueue and reply {status:accepted,requestId:N}. loop() applies it
(SomfyJson.cpp, next to fromJSON) and broadcasts requestResult {requestId,
ok, id, code, desc}. One edit at a time; a second gets 503, a body over
4 KB gets 413.
ModelEditor.h/.cpp holds the rules, tested natively: the lowest free id,
the next sort order, a free remote address, adding to and removing from
the group-member and repeater lists, and the GPIO pin-conflict check. They
replace the getNext*Id/getMax*Order copies, the remote-address search,
the list code and the inline pin checks. The pin check now uses the
protocol being saved and checks every pin against Ethernet, not only up.
/getNextRoom, /getNextShade, /getNextGroup, /groupOptions and a new
/repeaters (the UI already called it) are ModelSnapshot reads.
The web UI's editJSON() sends an edit, waits for its requestResult, then
reads the item back from /shade, /group, /room or /repeaters, so the
callbacks that used the old reply bodies are unchanged. No result within
5 s offers a reload; reads and edits told Busy are retried. It now also
refreshes its lists on shadeAdded/shadeRemoved/groupAdded/groupRemoved
from other clients, and procRoomRemoved keeps the right rooms.
Also fixed: a shade that fails validation is no longer added; linked
repeaters and sort orders are saved; linking reports a full list.
27 new native tests, 319 in all. Flash: esp32devdbg -11,484 bytes,
esp32dev -7,180 bytes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
/controller, /discovery, /rooms, /shades, /groups, /room, /shade and /group
now take a SnapshotSlots slot, queue a fill on the LoopQueue and send a
chunked response whose body waits (RESPONSE_TRY_AGAIN) until loop() has
copied the shade model into the slot. SnapshotWriter then streams the
document from that copy a unit at a time, so each document describes one
moment. At most two reads run at once; a third gets 503. A slot's 5.6 KB
snapshot is allocated only while a read holds it, and its atomic state
decides whether loop() or the read frees it when the read goes away first.
The JSON of each item is unchanged and now lives in ModelSnapshot.cpp,
where the native tests check it. Replies still written on the web server
task copy their one item with SomfySnapshot.cpp, so serializing a group
no longer calls updateFlags(), which emitted groupState and published MQTT
from async_tcp.
Also: every read route is chunked and leaves out an item too big for its
3 KB unit, like /controller did; /discovery drops its timing log; the
SOMFY_MAX_* limits move to ShadeTypes.h.
21 new native tests, 292 in all. Flash: esp32devdbg +440 bytes, esp32dev
+2,064 bytes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HTTP routes and MQTT commands now both build a shade request and submit it
to the LoopQueue, which loop() drains into ShadeRequests. ShadeRequests
finds the shade or group, turns client positions into stored ones, checks
ranges and fills in default repeats, and reaches the shades through the
ShadeOps seam: SomfyShadeOps on the device, a recording fake in the native
tests. MqttCommands turns a .../set topic into a shade request.
Behaviour that changes:
- MQTT tiltTarget, mypos, myTiltPos and tiltPosition, and /setPositions,
now honour flipPosition like the other routes.
- MQTT mypos keeps the favorite tilt (was set to 0) and myTiltPos keeps
the favorite lift.
- repeat 0 on /shadeCommand means no repeats, as it did for groups; a
JSON repeat over 127 is capped instead of wrapping to the default.
- Position corrections go through the setters, so MQTT publishes them.
- MQTT commands wait while the radio is full instead of being refused.
- The queue is drained every loop() pass and no longer from inside a
GitHub firmware download.
WebCommand.h is replaced by LoopQueue.h and ShadeRequests.h. 45 new native
tests, 271 in all. Flash: esp32devdbg +976 bytes, esp32dev +1,380 bytes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
esp32devdbg used 98.3% of the 1.5 MB OTA slot. On esp32_huge_app.csv the
same 1,546,405-byte image uses 49.2%, so the refactors ahead have room.
The release envs keep esp32_3MB.csv and CI keeps them within limits.
NVS stays at 0x9000, but the file system shrinks from 0xE0000 to 0xD0000,
so a board moving to this table needs a backup, a USB flash with
uploadfs, and a restore.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The decoding of the time between received edges into frame bits moves out
of Transceiver::handleReceive unchanged into decodePulse(), with the RTS
timings and the receive buffer type. It stays in IRAM on the ESP32 and is
now covered by native tests that feed it the edges sendFrame() produces
for 56 and 80-bit first frames and repeats, a glitch and a broken pulse.
handleReceive keeps the noise guard, the edge timing and the RX queue.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The sun and wind timers were spread over processFrame, checkMovement and
processInternalCommand. ShadeSensors now holds them and decides when the
weather extends or retracts a shade, when turning the sun flag on moves
it, and when wind blocks a remote Down. Each caller still sets the targets
itself, so no shade moves differently yet.
The timers are now 32-bit like millis(). As 64-bit values holding a 32-bit
millis() they fired at once after the rollover every 49.7 days. The debug
logs of each timer go: they were compiled out at CORE_DEBUG_LEVEL 3.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
At -Og GCC only caps inlining growth in units over large-unit-insns
(10000 instructions). Smaller files inline ArduinoJson's helpers into
every caller: moving the JSON parsing out of Somfy.cpp grew the image by
19 KB, past the 1.5 MB app partition. Treating every file as large keeps
inlining at the level the big files already had and frees 13 KB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The order radio jobs go out in was spread across callers, file statics and
the radio task: each remote tracked its last back job so a stop could decide
whether it may jump the queue, and the task kept a separate count of the back
jobs it had taken. RadioScheduler now owns the waiting jobs, their tickets,
the stop-goes-first rule, delayed jobs, flush and suspend, and the outcome of
every job. It is plain C++, with the time passed in and the caller locking,
so all of it is covered by native tests. Transceiver keeps the FreeRTOS task,
the locks and the CC1101.
sendCommandAfter returns the job's ticket instead of leaving it in lastTxSeq.
Two stops for the same remote now go out in the order they were sent; queued
to the front they used to come out reversed, putting the rolling codes out of
order.
Adds GLOSSARY.md for the radio terms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The frame was popped before queueTx(), so whenever the radio queue was busy
it was lost. Peek it instead, only remove it once it is queued (or TX is
suspended), and don't try while the queue has no room. The repeater buffer
moves to TxBuffer.h/.cpp so it can be unit tested.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Arduino core already links with --wrap=log_printf for the ESP
Insights hook in libesp_diagnostics, so defining __wrap_log_printf
failed to link with a duplicate definition. That hook prints through
log_printfv, so wrap that instead and take the lock there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Arduino core's log_printf() has its UART lock commented out and
writes with ets_printf(), so lines logged at the same time from
async_tcp and loop() came out interleaved character by character. It
also formats short lines into one static buffer shared by every task.
Wrap log_printf at link time and hold a mutex around the core's
log_printfv(). It never blocks before the scheduler runs, in an ISR or
in a critical section, and waits at most 50ms before printing anyway.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
checkMovement worked out the position four times, nearly copy-pasted,
for lift down, lift up, tilt down and tilt up. All four now call
travelPosition(), which keeps the same arithmetic, including how the
elapsed time wraps with millis(). Tilt up with no tilt time still
stops the tilt direction in the caller.
transformPosition and transformCommand keep their behaviour through
the new displayPosition() and flipCommand() helpers. The native env
builds ShadeMotion.cpp so all of this can be unit tested on the PC.
No behaviour change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
JsonFormatter and BufferedJsonFormatter move verbatim out of
WResp.cpp/WResp.h, which now include JsonFormatter.h. They don't need
the web server, so on their own they can be unit tested on the PC; the
native env builds the new file. AsyncJsonResp and JsonSockEvent stay
in WResp. No behaviour change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Builds SomfyFrame.cpp in the native env, with a minimal String and
no-op ESP_LOGx in the stubs, and tests:
- a fixed 56-bit frame, byte for byte, so what goes on air is pinned
- encode/decode round trips for 56-bit, 80-bit (repeats, Favorite,
Stop, steps, Toggle), RTW and RTV frames
- rejection of bad checksums, addresses, rolling codes, keys and
80-bit parity
- repeat/synonym tracking in copy()
- parsing and naming of commands
The command-name round trip fails: names the firmware reports, such as
"Step Up" and "My+Up", parse back to the wrong command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adds an [env:native] for host-side unit tests (pio test -e native) with
a minimal Arduino.h stub, and covers the Utils helpers: _trim,
toBoolean, SETCHARPROP, sortArray and the Timestamp conversions.
The firmware envs now extend a shared [esp32] section instead of [env]
so the native env doesn't inherit the Arduino framework, the ESP32
libraries or the build scripts.
The half-hour calcTZOffset cases fail: +05:30 comes back as 2300.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Web command handlers ran on the async_tcp task and blocked up to 3s
waiting for loop() to bit-bang radio frames. async_tcp also services the
WebSocket on port 8080, so pongs stalled and Home Assistant
(ping_timeout=15) disconnected when several covers were commanded.
- Add a radio_tx FreeRTOS task with a job queue; sendFrame/repeatFrame
and repeater frames enqueue instead of transmitting inline.
- Serialize CC1101 access with a recursive mutex (TX task, apply, end,
frequency scan, RSSI read).
- Make Web::queueCommand fire-and-forget; drop the done semaphore.
- Route /setMyPosition and /unpairShade through the command queue.
- Clamp repeats to MAX_TX_REPEATS (40).
- Pin AsyncTCP to core 0 on dual-core targets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
