esp32devdbg used 98.3% of the 1.5 MB OTA slot. On esp32_huge_app.csv the
same 1,546,405-byte image uses 49.2%, so the refactors ahead have room.
The release envs keep esp32_3MB.csv and CI keeps them within limits.
NVS stays at 0x9000, but the file system shrinks from 0xE0000 to 0xD0000,
so a board moving to this table needs a backup, a USB flash with
uploadfs, and a restore.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The decoding of the time between received edges into frame bits moves out
of Transceiver::handleReceive unchanged into decodePulse(), with the RTS
timings and the receive buffer type. It stays in IRAM on the ESP32 and is
now covered by native tests that feed it the edges sendFrame() produces
for 56 and 80-bit first frames and repeats, a glitch and a broken pulse.
handleReceive keeps the noise guard, the edge timing and the RX queue.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The sun and wind timers were spread over processFrame, checkMovement and
processInternalCommand. ShadeSensors now holds them and decides when the
weather extends or retracts a shade, when turning the sun flag on moves
it, and when wind blocks a remote Down. Each caller still sets the targets
itself, so no shade moves differently yet.
The timers are now 32-bit like millis(). As 64-bit values holding a 32-bit
millis() they fired at once after the rollover every 49.7 days. The debug
logs of each timer go: they were compiled out at CORE_DEBUG_LEVEL 3.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
At -Og GCC only caps inlining growth in units over large-unit-insns
(10000 instructions). Smaller files inline ArduinoJson's helpers into
every caller: moving the JSON parsing out of Somfy.cpp grew the image by
19 KB, past the 1.5 MB app partition. Treating every file as large keeps
inlining at the level the big files already had and frees 13 KB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The order radio jobs go out in was spread across callers, file statics and
the radio task: each remote tracked its last back job so a stop could decide
whether it may jump the queue, and the task kept a separate count of the back
jobs it had taken. RadioScheduler now owns the waiting jobs, their tickets,
the stop-goes-first rule, delayed jobs, flush and suspend, and the outcome of
every job. It is plain C++, with the time passed in and the caller locking,
so all of it is covered by native tests. Transceiver keeps the FreeRTOS task,
the locks and the CC1101.
sendCommandAfter returns the job's ticket instead of leaving it in lastTxSeq.
Two stops for the same remote now go out in the order they were sent; queued
to the front they used to come out reversed, putting the rolling codes out of
order.
Adds GLOSSARY.md for the radio terms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The frame was popped before queueTx(), so whenever the radio queue was busy
it was lost. Peek it instead, only remove it once it is queued (or TX is
suspended), and don't try while the queue has no room. The repeater buffer
moves to TxBuffer.h/.cpp so it can be unit tested.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Arduino core already links with --wrap=log_printf for the ESP
Insights hook in libesp_diagnostics, so defining __wrap_log_printf
failed to link with a duplicate definition. That hook prints through
log_printfv, so wrap that instead and take the lock there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Arduino core's log_printf() has its UART lock commented out and
writes with ets_printf(), so lines logged at the same time from
async_tcp and loop() came out interleaved character by character. It
also formats short lines into one static buffer shared by every task.
Wrap log_printf at link time and hold a mutex around the core's
log_printfv(). It never blocks before the scheduler runs, in an ISR or
in a critical section, and waits at most 50ms before printing anyway.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
checkMovement worked out the position four times, nearly copy-pasted,
for lift down, lift up, tilt down and tilt up. All four now call
travelPosition(), which keeps the same arithmetic, including how the
elapsed time wraps with millis(). Tilt up with no tilt time still
stops the tilt direction in the caller.
transformPosition and transformCommand keep their behaviour through
the new displayPosition() and flipCommand() helpers. The native env
builds ShadeMotion.cpp so all of this can be unit tested on the PC.
No behaviour change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
JsonFormatter and BufferedJsonFormatter move verbatim out of
WResp.cpp/WResp.h, which now include JsonFormatter.h. They don't need
the web server, so on their own they can be unit tested on the PC; the
native env builds the new file. AsyncJsonResp and JsonSockEvent stay
in WResp. No behaviour change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Builds SomfyFrame.cpp in the native env, with a minimal String and
no-op ESP_LOGx in the stubs, and tests:
- a fixed 56-bit frame, byte for byte, so what goes on air is pinned
- encode/decode round trips for 56-bit, 80-bit (repeats, Favorite,
Stop, steps, Toggle), RTW and RTV frames
- rejection of bad checksums, addresses, rolling codes, keys and
80-bit parity
- repeat/synonym tracking in copy()
- parsing and naming of commands
The command-name round trip fails: names the firmware reports, such as
"Step Up" and "My+Up", parse back to the wrong command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adds an [env:native] for host-side unit tests (pio test -e native) with
a minimal Arduino.h stub, and covers the Utils helpers: _trim,
toBoolean, SETCHARPROP, sortArray and the Timestamp conversions.
The firmware envs now extend a shared [esp32] section instead of [env]
so the native env doesn't inherit the Arduino framework, the ESP32
libraries or the build scripts.
The half-hour calcTZOffset cases fail: +05:30 comes back as 2300.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Web command handlers ran on the async_tcp task and blocked up to 3s
waiting for loop() to bit-bang radio frames. async_tcp also services the
WebSocket on port 8080, so pongs stalled and Home Assistant
(ping_timeout=15) disconnected when several covers were commanded.
- Add a radio_tx FreeRTOS task with a job queue; sendFrame/repeatFrame
and repeater frames enqueue instead of transmitting inline.
- Serialize CC1101 access with a recursive mutex (TX task, apply, end,
frequency scan, RSSI read).
- Make Web::queueCommand fire-and-forget; drop the done semaphore.
- Route /setMyPosition and /unpairShade through the command queue.
- Clamp repeats to MAX_TX_REPEATS (40).
- Pin AsyncTCP to core 0 on dual-core targets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
