Robert Strouse
bb36ed0f82
Add dry contact support for IO Remote and Relays #165
2023-10-10 11:41:21 -07:00
Robert Strouse
87995bf707
Added Remote protocol #165 , added mac to MQTT #167
2023-10-07 11:12:45 -07:00
Robert Strouse
4d49a048f4
GPIO motor support #165 Publish only changes #167
2023-10-05 14:52:54 -07:00
Robert Strouse
1cb9746cc8
Added functionality for euro lift tilt mechanisms.
2023-09-28 18:25:09 -07:00
Robert Strouse
a823d2349a
Added additional checks for firmware updates #157 Added endpoints for setting current position #156
2023-09-24 15:12:15 -07:00
Robert Strouse
a6c7601458
Added the ability to scan frequencies from remotes.
2023-09-20 11:34:03 -07:00
Robert Strouse
ea37fa0002
Fix toggle button for 1-button controllers.
2023-09-19 20:54:24 -07:00
Robert Strouse
3590f0d124
v2.1.6 Distro repair
2023-09-17 09:48:59 -07:00
Robert Strouse
4ad2cf7567
v2.1.6 Update
...
* Added Virtual Remote
* Added Dry Contact
* Fixed processed flag
* Added backup and restore options
2023-09-16 11:19:49 -07:00
Robert Strouse
7b255e3acb
Added ui for controlling drapery directions
2023-09-09 12:39:03 -07:00
Robert Strouse
ac835305cb
Added left and right drapery pulls.
2023-09-04 12:34:52 -07:00
Robert Strouse
90b247e7d8
Add the ability to set the shade and group display order #139 and suspend MQTT responses while updating the firmware.
2023-09-04 10:33:53 -07:00
Robert Strouse
92b9b679f9
Support for Garage doors
2023-08-31 16:13:22 -07:00
Robert Strouse
64d7abdc16
Added stubs for light controls
2023-08-28 17:49:28 -07:00
Robert Strouse
74ee9f6f25
Added garage door motor control #138
2023-08-27 16:04:16 -07:00
Robert Strouse
ff2d150ad8
Increase timing for prog command responses for slow motor pairing #121 #127
2023-08-18 13:22:26 -07:00
Robert Strouse
fe2f50ab9f
Added support for Tilt Only motors. Improved RTV protocol detection.
2023-08-13 15:30:23 -07:00
Robert Strouse
ff16bb6107
Add the ability to set the number of repeats per motor when sending commands #113
2023-07-23 15:22:20 -07:00
Robert Strouse
cd24ca3510
Publish 2.1.1
2023-07-23 13:08:47 -07:00
Robert Strouse
6711162c55
Added processing for Enter key in password dialog #108
2023-07-21 13:37:42 -07:00
Robert Strouse
d471745489
Fix issue where nvs was not getting reset with rollingCodes from backup file.
2023-07-20 20:10:43 -07:00
Robert Strouse
7f4cc19914
Fix login for username/password #108
2023-07-20 11:10:04 -07:00
Robert Strouse
120f6be664
Fix groupCommand route endpoint #105
2023-07-19 17:10:59 -07:00
Robert Strouse
adb1fd3aaa
Expand MQTT hostname to 64 bytes #103
2023-07-19 11:07:43 -07:00
Robert Strouse
42947690a2
v2.0.0 Release Candidate
...
Added functions for emitting the last command for a motor.
2023-07-07 15:25:01 -07:00
Robert Strouse
d5a237acea
Only load the network tab when switching once.
2023-07-04 09:10:21 -07:00
Robert Strouse
d228a21c83
Pre-v2.0.0 adds groups, groups, security, and tab interface #83 #53
2023-07-01 09:23:11 -07:00
Robert Strouse
e960579f3e
Allow RTV selection in shade config. #77
2023-06-25 11:58:20 -07:00
Robert Strouse
b279efdb1f
Add RTV protocol support for 433.92 RTS frames. #77
...
Begin adding v2.0 for motor groups.
2023-06-25 11:51:35 -07:00
Robert Strouse
e54621f171
Added shutter motor type and extended frequency range #77
2023-06-25 08:48:36 -07:00
Robert Strouse
415fec020e
Disable backup download during application update on mobile #47
2023-06-19 13:00:23 -07:00
Robert Strouse
ec499cbec4
Add invert options for commands and position #69
2023-06-16 17:42:56 -07:00
Robert Strouse
b6a82e2e45
Added Invert Commands checkbox for motors
2023-06-15 15:12:54 -07:00
Robert Strouse
107c0357d1
Combined and renamed the timezones list.
2023-06-13 18:30:20 -07:00
Robert Strouse
2ecc0de36e
Coding for sun and wind flag processing v1.7.0
...
* Added MQTT control for sunFlag and tiltTarget.
* Move my position if it is set per sun sensor instructions.
* Add sun/wind states to persistence.
* Bump restore file version
2023-06-04 13:04:57 -07:00
Robert Strouse
cd173525b1
Add the ability to modify the base radio frequency.
2023-06-01 14:21:58 -07:00
Robert Strouse
2bfba8e2dd
Bump v1.6.2 for awning mods
2023-05-30 11:13:49 -07:00
Álvaro Fernández Rojas
f632dc9c54
Somfy: add initial sun awnings support
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-05-29 15:14:30 +02:00
Robert Strouse
36356e5774
Stamp v1.6.1
2023-05-23 07:39:56 -07:00
Robert Strouse
2378ac780e
Added timezone for Europe/Berlin #49 . Publish v1.6.0
2023-05-16 09:47:27 -07:00
Robert Strouse
65e4caf3b2
Add support for RTW protocols #38
2023-05-12 18:17:57 -07:00
Robert Strouse
ac6d6ee34d
Fix setting My position for some motors #15
2023-05-12 10:23:14 -07:00
Robert Strouse
56aabfd1d1
v1.5.3 - Filter invalid frames
...
* Added filters for 0 address and undefined command references.
2023-05-08 16:27:45 -07:00
Robert Strouse
156bdee0a5
Release v1.5.2
...
* Additional filters for invalid frames
* Added tilt calibration for integrated tilt blinds
2023-05-07 12:08:39 -07:00
Robert Strouse
fb677dc239
Added step size for tilt wheels
2023-04-29 12:48:31 -07:00
Robert Strouse
39c6e08ca5
v1.5.1 Bug Fixes
...
* Fixed issue where prog command was being filtered out #27
* Added tilt wheel commands for tilt positioning with integrated tilt motors #17
* Added tilt position visibility for Edit Shade screen
2023-04-21 14:12:28 -07:00
Robert Strouse
5a16977ea9
v1.5.0 updates
...
* Support for integrated tilt types
* Increased linked remotes to 7 #25 .
* Fixed issue #25 by increasing JSON buffer
* Changed software sync detection for linked remotes to better match on sync #26
2023-04-20 14:29:13 -07:00
Robert Strouse
aec9989d8d
Commit v1.4.7
...
Changes software sync for certain motors notably Glydea.
2023-04-12 12:57:08 -07:00
Robert Strouse
a80b2ca97c
Testing timings for Glydea motors. #16
2023-04-12 08:41:28 -07:00
Robert Strouse
9b8a952db9
Change timings for wakeup
...
* This should alleviate some issues with battery powered motors where it appears the motor goes to sleep when the delay between the wakeup pulse and the start of the hardware sync is too long.
2023-04-03 18:25:04 -07:00
