aaribaud/ESPSomfy-RTS
0
0
Fork 0
mirror of https://github.com/rstrouse/ESPSomfy-RTS.git synced 2025-12-13 19:12:10 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions
103 commits 1 branch 60 tags 68 MiB
Commit graph

103 commits

This branch
This branch
All branches
Author SHA1 Message Date
rstrouse
a67b8401d5
Merge pull request #55 from Noltari/awnings-support 
Add initial sun awnings support
 2023-05-30 07:24:23 -07:00
Álvaro Fernández Rojas
17102a1a7d Somfy: improve status 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2023-05-29 18:33:43 +02:00
Álvaro Fernández Rojas
8ed5346992 Somfy: add Sun status command 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2023-05-29 16:02:26 +02:00
Álvaro Fernández Rojas
f632dc9c54 Somfy: add initial sun awnings support 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2023-05-29 15:14:30 +02:00
Robert Strouse
847a808351 Stamp release v1.6.1 2023-05-23 08:58:28 -07:00
Robert Strouse
36356e5774 Stamp v1.6.1 2023-05-23 07:39:56 -07:00
Robert Strouse
5f67b99f88 v1.6.1 
* Added Sao Paulo timezone
* Check for target change before movement so the shades to run to my position.
 2023-05-22 19:10:02 -07:00
rstrouse
a5868618c7
Update README.md 2023-05-17 12:20:19 -07:00
rstrouse
9adf52f5f7
Update README.md 2023-05-17 12:18:20 -07:00
Robert Strouse
2378ac780e Added timezone for Europe/Berlin #49. Publish v1.6.0 2023-05-16 09:47:27 -07:00
Robert Strouse
930348ead8 Added RTW commands for button combinations 2023-05-13 08:37:20 -07:00
Robert Strouse
65e4caf3b2 Add support for RTW protocols #38 2023-05-12 18:17:57 -07:00
Robert Strouse
ac6d6ee34d Fix setting My position for some motors #15 2023-05-12 10:23:14 -07:00
Robert Strouse
53ac717cf3 Tag v1.5.3 2023-05-08 17:14:30 -07:00
Robert Strouse
56aabfd1d1 v1.5.3 - Filter invalid frames 
* Added filters for 0 address and undefined command references.
 2023-05-08 16:27:45 -07:00
Robert Strouse
1dbb2f4434 Remove my command at the stop if we are seeking to 0 or 100% 2023-05-08 12:15:02 -07:00
Robert Strouse
20a3cef076 Update SomfyController.littlefs.bin 2023-05-08 10:57:00 -07:00
Robert Strouse
156bdee0a5 Release v1.5.2 
* Additional filters for invalid frames
* Added tilt calibration for integrated tilt blinds
 2023-05-07 12:08:39 -07:00
Robert Strouse
e8296d3782 Rewind frame pulses whenever signal pulse is out of range 
#36
#35
 2023-05-03 18:40:19 -07:00
Robert Strouse
fb677dc239 Added step size for tilt wheels 2023-04-29 12:48:31 -07:00
Robert Strouse
7425a46d1a Shorten delay between lift and tilt movement. 2023-04-28 10:35:44 -07:00
Robert Strouse
22819be9be Add delay after lift movement and before tilt movment. 2023-04-28 09:16:03 -07:00
Robert Strouse
169208025f Engage my position when only the tilt position will be changing. 2023-04-26 10:07:23 -07:00
Robert Strouse
2c036f664c Issue stop command prior to issuing tilt positions. 2023-04-26 08:42:44 -07:00
Robert Strouse
8ca1957d38 Filter out repeats for tilt wheels. 2023-04-25 09:33:25 -07:00
Robert Strouse
ae87dc1d82 Beta processing for step commands algorithm 2023-04-24 18:59:05 -07:00
Robert Strouse
39c6e08ca5 v1.5.1 Bug Fixes 
* Fixed issue where prog command was being filtered out #27
* Added tilt wheel commands for tilt positioning with integrated tilt motors #17
* Added tilt position visibility for Edit Shade screen
 2023-04-21 14:12:28 -07:00
Robert Strouse
1174bed558 Bug Fix Prog 
* Added filter for prog frame #27
* Expanded link remote json buffer #25
* Display tilt position on edit shade screen
 2023-04-21 12:46:10 -07:00
Robert Strouse
5a16977ea9 v1.5.0 updates 
* Support for integrated tilt types
* Increased linked remotes to 7 #25.
* Fixed issue #25 by increasing JSON buffer
* Changed software sync detection for linked remotes to better match on sync #26
 2023-04-20 14:29:13 -07:00
Robert Strouse
aec9989d8d Commit v1.4.7 
Changes software sync for certain motors notably Glydea.
 2023-04-12 12:57:08 -07:00
Robert Strouse
a80b2ca97c Testing timings for Glydea motors. #16 2023-04-12 08:41:28 -07:00
Robert Strouse
ca76d01a1a Changed last pulse so it sets the final bit to 0. It only should do this if the last bit was 0. 2023-04-07 18:50:14 -07:00
Robert Strouse
b6bc57e437 Change pairing so that the command can be repeated on failure. #15. Add extra 0 to indicate there are no more bits to be read from the bitstream. 2023-04-05 14:38:11 -07:00
Robert Strouse
3b8c2e0aea Fix script error when transitioning from wifi to lan and back again. 2023-04-04 13:02:53 -07:00
Robert Strouse
b1b8d1be46 Increase WiFi passphrase length to 63 + terminator. #13 2023-04-04 13:00:18 -07:00
Robert Strouse
9b8a952db9 Change timings for wakeup 
* This should alleviate some issues with battery powered motors where it appears the motor goes to sleep when the delay between the wakeup pulse and the start of the hardware sync is too long.
 2023-04-03 18:25:04 -07:00
Robert Strouse
2c8b6d7f2f Stamp binary with firmware version. #12 2023-04-01 14:22:27 -07:00
Robert Strouse
209a2d7960 Fix saving MQTT port settings #12 2023-04-01 13:33:28 -07:00
Robert Strouse
d239ce857a Reduce the inter-frame silence for 80-bit protocols by 24 symbols. 2023-03-29 16:34:44 -07:00
Robert Strouse
5f5ac9fa32 Work on 80-bit protocol 
* Fixes issue #11 TX Power is now persisted to NVS
* Increase timing for tilt motors from 7 to 15 beats. #1
* Add time to frame log.
* Allow RX and TX pins to be shared and multiplexed
 2023-03-29 11:41:11 -07:00
Robert Strouse
ab7cdba519 Fixed issue where step up and down command bytes were reversed on receive. 
* TX commands for 80-bit controllers now send the last 3 bytes as witnessed by others
* RX commands for step up/down only translate the last byte as a command byte.
* Fixed inverted step commands for the API.
 2023-03-20 17:11:28 -07:00
Robert Strouse
d3acf6bb5f Add ability to send repeats via API. Tweak 80-bit timing 
Add the ability to identify how many repeats you want on the API command.
Fix timing for bit output when the shade is configured for 80-bits
 2023-03-19 16:54:19 -07:00
Robert Strouse
370b8f1a23 80-bit and 56-bit protocols on same transceiver 
Added the ability to process 80-bit and 56-bit motors on the same ESPSomfy RTS device.
 2023-03-18 18:41:04 -07:00
Robert Strouse
3f662b7bd0 v1.4.1 
Add the ability to view receiver data.
 2023-03-15 15:17:33 -07:00
rstrouse
7bd23e6bbe
Update README.md 2023-03-12 13:13:03 -07:00
rstrouse
0246c87ac3
Update README.md 2023-03-12 09:56:42 -07:00
Robert Strouse
dce0ae0c04 v1.4.0 upade 
* Moved shade storage from NVS.  NVS storage became limited because of the wired ethernet boards.  This limited the number of potential shades to around 20.
* Added the ability to backup the shade configuration
* Added the ability to restore the shade configuration.
* Increased up. down, and tilt timing value to allow for up to 54 days of transition.  The previous 16bit value did not allow for very slow shades and was limited to just over a minute.
* UI cleanup and additional messages.
* Transceiver tuning now applies the rx bandwidth in the proper order so no reboot is required.
 2023-03-11 10:26:23 -08:00
rstrouse
21d56993d0
Update README.md 2023-03-04 12:40:47 -08:00
Robert Strouse
2730a994a7 Update release binaries 
Update the binaries to the current release
 2023-03-04 11:27:23 -08:00
Robert Strouse
71e5b8a648 Added API Services for Tilt HomeAssistant 
Added api services to support blind definitions in Home Assistant.  Stop tilt function when my button is pressed and the tilt operation is in progress.  Bump to v1.3.2
 2023-03-04 09:59:07 -08:00