Robert Strouse
4ad2cf7567
v2.1.6 Update
...
* Added Virtual Remote
* Added Dry Contact
* Fixed processed flag
* Added backup and restore options
2023-09-16 11:19:49 -07:00
Robert Strouse
7b255e3acb
Added ui for controlling drapery directions
2023-09-09 12:39:03 -07:00
Robert Strouse
ac835305cb
Added left and right drapery pulls.
2023-09-04 12:34:52 -07:00
Robert Strouse
90b247e7d8
Add the ability to set the shade and group display order #139 and suspend MQTT responses while updating the firmware.
2023-09-04 10:33:53 -07:00
Robert Strouse
64d7abdc16
Added stubs for light controls
2023-08-28 17:49:28 -07:00
Robert Strouse
74ee9f6f25
Added garage door motor control #138
2023-08-27 16:04:16 -07:00
Robert Strouse
ff2d150ad8
Increase timing for prog command responses for slow motor pairing #121 #127
2023-08-18 13:22:26 -07:00
Robert Strouse
0314760bec
Set checksum for RTV prog command
2023-08-14 16:15:22 -07:00
Robert Strouse
fe2f50ab9f
Added support for Tilt Only motors. Improved RTV protocol detection.
2023-08-13 15:30:23 -07:00
Sven Rymenants
e6ad7b4b62
Fix error info: Use correct element id for errors
2023-08-04 22:12:32 +02:00
Robert Strouse
ff16bb6107
Add the ability to set the number of repeats per motor when sending commands #113
2023-07-23 15:22:20 -07:00
Robert Strouse
cd24ca3510
Publish 2.1.1
2023-07-23 13:08:47 -07:00
Robert Strouse
5c06f2a6d4
Fixed script error associated with unlinking remotes.
2023-07-23 08:11:24 -07:00
Robert Strouse
d471745489
Fix issue where nvs was not getting reset with rollingCodes from backup file.
2023-07-20 20:10:43 -07:00
Robert Strouse
7f4cc19914
Fix login for username/password #108
2023-07-20 11:10:04 -07:00
Robert Strouse
120f6be664
Fix groupCommand route endpoint #105
2023-07-19 17:10:59 -07:00
Robert Strouse
adb1fd3aaa
Expand MQTT hostname to 64 bytes #103
2023-07-19 11:07:43 -07:00
Robert Strouse
42947690a2
v2.0.0 Release Candidate
...
Added functions for emitting the last command for a motor.
2023-07-07 15:25:01 -07:00
Robert Strouse
2c02306b24
Catch service error for security settings
2023-07-04 09:02:35 -07:00
Robert Strouse
e3686cd673
Close group edit when switching out of config pages.
2023-07-04 08:37:35 -07:00
Robert Strouse
97c1fccdc7
Cleanup for v2.0.0 #83 #53
2023-07-03 16:10:16 -07:00
Robert Strouse
1ab1dbd9cb
Post load MQTT settings after login
2023-07-01 09:37:13 -07:00
Robert Strouse
d228a21c83
Pre-v2.0.0 adds groups, groups, security, and tab interface #83 #53
2023-07-01 09:23:11 -07:00
Pulpyyyy
19d9527a00
Add Europe/Paris Timezone
2023-06-28 05:17:14 +02:00
Robert Strouse
e54621f171
Added shutter motor type and extended frequency range #77
2023-06-25 08:48:36 -07:00
Robert Strouse
415fec020e
Disable backup download during application update on mobile #47
2023-06-19 13:00:23 -07:00
Robert Strouse
ec499cbec4
Add invert options for commands and position #69
2023-06-16 17:42:56 -07:00
Robert Strouse
536bf839a1
Change pin dispositions for MISO pins #73
2023-06-16 07:55:07 -07:00
Robert Strouse
b6a82e2e45
Added Invert Commands checkbox for motors
2023-06-15 15:12:54 -07:00
Robert Strouse
107c0357d1
Combined and renamed the timezones list.
2023-06-13 18:30:20 -07:00
Robert Strouse
2ecc0de36e
Coding for sun and wind flag processing v1.7.0
...
* Added MQTT control for sunFlag and tiltTarget.
* Move my position if it is set per sun sensor instructions.
* Add sun/wind states to persistence.
* Bump restore file version
2023-06-04 13:04:57 -07:00
Robert Strouse
f850cc0a1e
Added sensor inputs from wind/sun sensors.
2023-06-01 19:31:11 -07:00
Robert Strouse
cd173525b1
Add the ability to modify the base radio frequency.
2023-06-01 14:21:58 -07:00
Robert Strouse
3ee5bb45c8
Add functionality for awnings and sun flag. #54
2023-05-30 19:10:57 -07:00
Robert Strouse
2bfba8e2dd
Bump v1.6.2 for awning mods
2023-05-30 11:13:49 -07:00
Robert Strouse
36356e5774
Stamp v1.6.1
2023-05-23 07:39:56 -07:00
Robert Strouse
5f67b99f88
v1.6.1
...
* Added Sao Paulo timezone
* Check for target change before movement so the shades to run to my position.
2023-05-22 19:10:02 -07:00
Robert Strouse
2378ac780e
Added timezone for Europe/Berlin #49 . Publish v1.6.0
2023-05-16 09:47:27 -07:00
Robert Strouse
65e4caf3b2
Add support for RTW protocols #38
2023-05-12 18:17:57 -07:00
Robert Strouse
ac6d6ee34d
Fix setting My position for some motors #15
2023-05-12 10:23:14 -07:00
Robert Strouse
56aabfd1d1
v1.5.3 - Filter invalid frames
...
* Added filters for 0 address and undefined command references.
2023-05-08 16:27:45 -07:00
Robert Strouse
156bdee0a5
Release v1.5.2
...
* Additional filters for invalid frames
* Added tilt calibration for integrated tilt blinds
2023-05-07 12:08:39 -07:00
Robert Strouse
fb677dc239
Added step size for tilt wheels
2023-04-29 12:48:31 -07:00
Robert Strouse
39c6e08ca5
v1.5.1 Bug Fixes
...
* Fixed issue where prog command was being filtered out #27
* Added tilt wheel commands for tilt positioning with integrated tilt motors #17
* Added tilt position visibility for Edit Shade screen
2023-04-21 14:12:28 -07:00
Robert Strouse
1174bed558
Bug Fix Prog
...
* Added filter for prog frame #27
* Expanded link remote json buffer #25
* Display tilt position on edit shade screen
2023-04-21 12:46:10 -07:00
Robert Strouse
5a16977ea9
v1.5.0 updates
...
* Support for integrated tilt types
* Increased linked remotes to 7 #25 .
* Fixed issue #25 by increasing JSON buffer
* Changed software sync detection for linked remotes to better match on sync #26
2023-04-20 14:29:13 -07:00
Robert Strouse
aec9989d8d
Commit v1.4.7
...
Changes software sync for certain motors notably Glydea.
2023-04-12 12:57:08 -07:00
Robert Strouse
a80b2ca97c
Testing timings for Glydea motors. #16
2023-04-12 08:41:28 -07:00
Robert Strouse
ca76d01a1a
Changed last pulse so it sets the final bit to 0. It only should do this if the last bit was 0.
2023-04-07 18:50:14 -07:00
Robert Strouse
b6bc57e437
Change pairing so that the command can be repeated on failure. #15 . Add extra 0 to indicate there are no more bits to be read from the bitstream.
2023-04-05 14:38:11 -07:00
