HTTP routes and MQTT commands now both build a shade request and submit it
to the LoopQueue, which loop() drains into ShadeRequests. ShadeRequests
finds the shade or group, turns client positions into stored ones, checks
ranges and fills in default repeats, and reaches the shades through the
ShadeOps seam: SomfyShadeOps on the device, a recording fake in the native
tests. MqttCommands turns a .../set topic into a shade request.
Behaviour that changes:
- MQTT tiltTarget, mypos, myTiltPos and tiltPosition, and /setPositions,
now honour flipPosition like the other routes.
- MQTT mypos keeps the favorite tilt (was set to 0) and myTiltPos keeps
the favorite lift.
- repeat 0 on /shadeCommand means no repeats, as it did for groups; a
JSON repeat over 127 is capped instead of wrapping to the default.
- Position corrections go through the setters, so MQTT publishes them.
- MQTT commands wait while the radio is full instead of being refused.
- The queue is drained every loop() pass and no longer from inside a
GitHub firmware download.
WebCommand.h is replaced by LoopQueue.h and ShadeRequests.h. 45 new native
tests, 271 in all. Flash: esp32devdbg +976 bytes, esp32dev +1,380 bytes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ADR-0002 makes loop() the only writer of the shade model. The plan
puts ShadeRequests, ModelEditor and ModelSnapshot behind one LoopQueue
that the HTTP routes and MQTT commands feed, with the outputs fed by
per-field dirty bits. GLOSSARY.md gains the terms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The HTTP servers and MQTT command handling go to src/entryPoints/, the
socket emitter and the MQTT and socket output of shades, groups and rooms
to src/outputs/. GLOSSARY.md names what they become once split:
WebUiRoutes, ApiRoutes and MqttCommands in, MqttPublisher and
SocketEmitter out.
Only files and include paths change. esp32devdbg flash goes from
1,546,405 to 1,546,257 bytes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sending a command reads a remote's next rolling code, queues the frame and
commits the code, all on loop(). /setRollingCode, a shades restore and
/updateShadeConfig wrote the same codes from the web server task, so a set
could be undone by a command's commit, and a restore could save an older
code to NVS that survived the reboot. All three now go through the web
command queue to loop(). They don't use the radio, so they are never held
back or refused while it is busy.
/restore now answers after queueing the restore. A broken options string
used to send an error after the success answer had already gone out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
/setMyPosition filled in a missing tilt with the lift favorite, so a
request without a tilt set the favorite tilt to the lift's. It also took
the stored position as a display one, which flipped it twice on a shade
with flipPosition. requestedFavoriteTilt() now gives the favorite tilt as
displayed. Home Assistant never calls /setMyPosition and the web UI always
sends a tilt, so only other API callers see the change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
GLOSSARY.md gains the shade terms the new modules use (favorite, step,
sensor frame, sun flag, extend and retract) and the pulse decoder. The
split plan marks phase 2 done, with what changed in behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add the Somfy.cpp split plan with phases 0 and 1 marked done, what the
split taught about flash size in the debug build, and the phase 2 work
still open. KNOWN_ISSUES.md now names the new files.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
List every web handler that still changes the shade model, add the
oversized /controller items that are left out without telling the client,
the /linkRemote rolling-code race, and the /setMyPosition tilt default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A websocket event too large for its buffer has been logged and not
sent since 8881289, not sent truncated. Retitle the entry and point at
MAX_SOCK_RESPONSE by name rather than a stale line number.
- List the web server task handlers that still change the shade model
loop() owns: /setPaired, /setRollingCode and restore.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
loop() and the async web server task shared one global Preferences. A
begin() from one task failed while the other had a namespace open, and the
clear() or remove() after it then hit the other task's namespace: saving the
radio settings while a command committed its rolling code could erase every
rolling code.
Each function now opens NVS with a local Preferences. NVS serializes access
internally and the destructor closes the handle, so no lock is added (see
docs/adr/0001). No new tests: nothing here builds natively, and deleting the
global makes any missed use a compile error.
The read-then-commit races on rolling codes across tasks remain and are
tracked in docs/KNOWN_ISSUES.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
