mirror of
https://github.com/rstrouse/ESPSomfy-RTS.git
synced 2026-10-31 13:52:15 +01:00
395cb2d1c7
HTTP routes and MQTT commands now both build a shade request and submit it to the LoopQueue, which loop() drains into ShadeRequests. ShadeRequests finds the shade or group, turns client positions into stored ones, checks ranges and fills in default repeats, and reaches the shades through the ShadeOps seam: SomfyShadeOps on the device, a recording fake in the native tests. MqttCommands turns a .../set topic into a shade request. Behaviour that changes: - MQTT tiltTarget, mypos, myTiltPos and tiltPosition, and /setPositions, now honour flipPosition like the other routes. - MQTT mypos keeps the favorite tilt (was set to 0) and myTiltPos keeps the favorite lift. - repeat 0 on /shadeCommand means no repeats, as it did for groups; a JSON repeat over 127 is capped instead of wrapping to the default. - Position corrections go through the setters, so MQTT publishes them. - MQTT commands wait while the radio is full instead of being refused. - The queue is drained every loop() pass and no longer from inside a GitHub firmware download. WebCommand.h is replaced by LoopQueue.h and ShadeRequests.h. 45 new native tests, 271 in all. Flash: esp32devdbg +976 bytes, esp32dev +1,380 bytes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|---|---|---|
| .. | ||
| adr | ||
| KNOWN_ISSUES.md | ||
| LOOP_QUEUE_PLAN.md | ||
| NICE_TO_HAVE.md | ||
| SOMFY_SPLIT_PLAN.md | ||