mirror of
https://github.com/rstrouse/ESPSomfy-RTS.git
synced 2026-11-20 15:52:12 +01:00
docs: invite testing of expected non-Plus CC1101 compatibility
This commit is contained in:
parent
fce6f0cb6e
commit
bfd8c1c7b4
1 changed files with 8 additions and 6 deletions
14
README.md
14
README.md
|
|
@ -100,12 +100,14 @@ The firmware builds on [pioarduino](https://github.com/pioarduino/platform-espre
|
|||
The headless Plus profile uses the board's integrated CC1101 on the 433 MHz RF path,
|
||||
16 MB flash and 8 MB OPI PSRAM. It fixes the radio pins and reserves the shared
|
||||
peripheral, USB and flash/PSRAM pins; the display and encoder are not used.
|
||||
Hardware testing was performed on the **T-Embed CC1101 Plus**. The standard
|
||||
**T-Embed CC1101** is expected to work with the same profile: [LILYGO describes the
|
||||
Plus](https://lilygo.cc/products/t-embed-cc1101-plus) as that board with an added
|
||||
nRF24L01, and its [documented radio/power pins](https://github.com/Xinyuan-LilyGO/T-Embed-CC1101/blob/master/examples/utilities.h)
|
||||
match this profile. The non-Plus CC1101 model has not been tested here. This does
|
||||
not cover the plain T-Embed without a CC1101.
|
||||
|
||||
The standard T-Embed CC1101 is expected to work with the same firmware profile. Its
|
||||
documented radio wiring and memory configuration match, and we haven’t identified a
|
||||
reason it would need different firmware. We’ve tested only the Plus ourselves. If you
|
||||
have the standard CC1101 model, please try it and report whether it works, including
|
||||
your board revision and any problems.
|
||||
|
||||
This refers to the T-Embed CC1101, not the plain T-Embed without the radio.
|
||||
|
||||
```bash
|
||||
pio run -e lilygo-t-embed-cc1101-plus
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue