From bfd8c1c7b4a5a12aea0dc1d90748b8939c11178c Mon Sep 17 00:00:00 2001 From: "R. Sid Shaytay" <352722946+r-sidshaytay@users.noreply.github.com> Date: Fri, 6 Nov 2026 15:49:39 -0800 Subject: [PATCH] docs: invite testing of expected non-Plus CC1101 compatibility --- README.md | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/README.md b/README.md index b6b2775..6ce10a5 100644 --- a/README.md +++ b/README.md @@ -100,12 +100,14 @@ The firmware builds on [pioarduino](https://github.com/pioarduino/platform-espre The headless Plus profile uses the board's integrated CC1101 on the 433 MHz RF path, 16 MB flash and 8 MB OPI PSRAM. It fixes the radio pins and reserves the shared peripheral, USB and flash/PSRAM pins; the display and encoder are not used. -Hardware testing was performed on the **T-Embed CC1101 Plus**. The standard -**T-Embed CC1101** is expected to work with the same profile: [LILYGO describes the -Plus](https://lilygo.cc/products/t-embed-cc1101-plus) as that board with an added -nRF24L01, and its [documented radio/power pins](https://github.com/Xinyuan-LilyGO/T-Embed-CC1101/blob/master/examples/utilities.h) -match this profile. The non-Plus CC1101 model has not been tested here. This does -not cover the plain T-Embed without a CC1101. + +The standard T-Embed CC1101 is expected to work with the same firmware profile. Its +documented radio wiring and memory configuration match, and we haven’t identified a +reason it would need different firmware. We’ve tested only the Plus ourselves. If you +have the standard CC1101 model, please try it and report whether it works, including +your board revision and any problems. + +This refers to the T-Embed CC1101, not the plain T-Embed without the radio. ```bash pio run -e lilygo-t-embed-cc1101-plus