docs: invite testing of expected non-Plus CC1101 compatibility

This commit is contained in:
R. Sid Shaytay 2026-11-06 15:49:39 -08:00
parent fce6f0cb6e
commit bfd8c1c7b4

View file

@ -100,12 +100,14 @@ The firmware builds on [pioarduino](https://github.com/pioarduino/platform-espre
The headless Plus profile uses the board's integrated CC1101 on the 433 MHz RF path, The headless Plus profile uses the board's integrated CC1101 on the 433 MHz RF path,
16 MB flash and 8 MB OPI PSRAM. It fixes the radio pins and reserves the shared 16 MB flash and 8 MB OPI PSRAM. It fixes the radio pins and reserves the shared
peripheral, USB and flash/PSRAM pins; the display and encoder are not used. peripheral, USB and flash/PSRAM pins; the display and encoder are not used.
Hardware testing was performed on the **T-Embed CC1101 Plus**. The standard
**T-Embed CC1101** is expected to work with the same profile: [LILYGO describes the The standard T-Embed CC1101 is expected to work with the same firmware profile. Its
Plus](https://lilygo.cc/products/t-embed-cc1101-plus) as that board with an added documented radio wiring and memory configuration match, and we haven’t identified a
nRF24L01, and its [documented radio/power pins](https://github.com/Xinyuan-LilyGO/T-Embed-CC1101/blob/master/examples/utilities.h) reason it would need different firmware. We’ve tested only the Plus ourselves. If you
match this profile. The non-Plus CC1101 model has not been tested here. This does have the standard CC1101 model, please try it and report whether it works, including
not cover the plain T-Embed without a CC1101. your board revision and any problems.
This refers to the T-Embed CC1101, not the plain T-Embed without the radio.
```bash ```bash
pio run -e lilygo-t-embed-cc1101-plus pio run -e lilygo-t-embed-cc1101-plus