build: match Plus profile to standard upstream S3 layout

This commit is contained in:
R. Sid Shaytay 2026-11-06 12:36:18 -08:00
parent fdf840a236
commit a5afcfacea
2 changed files with 4 additions and 3 deletions

View file

@ -108,8 +108,9 @@ pio run -e lilygo-t-embed-cc1101-plus -t buildfs
``` ```
The images are in `.pio/build/lilygo-t-embed-cc1101-plus/`. This environment reuses The images are in `.pio/build/lilygo-t-embed-cc1101-plus/`. This environment reuses
`esp32_3MB.csv`. A device with another partition layout needs USB provisioning with `default_8MB.csv`, matching the generic S3 release: two 3.1875 MiB firmware slots
a fresh recovery backup and current rolling codes; firmware-only OTA cannot migrate and a 1.5 MiB filesystem. The upper 8 MiB stays unallocated. A device with another
partition layout needs USB provisioning with a fresh recovery backup and current rolling codes; firmware-only OTA cannot migrate
the layout. Do not substitute a generic S3 image for this profile. the layout. Do not substitute a generic S3 image for this profile.
Bugs and ideas go to the [issues](https://github.com/cjkas/ESPSomfy-RTS/issues); security problems go through [SECURITY.md](SECURITY.md). Bugs and ideas go to the [issues](https://github.com/cjkas/ESPSomfy-RTS/issues); security problems go through [SECURITY.md](SECURITY.md).

View file

@ -103,7 +103,7 @@ build_flags =
extends = esp32 extends = esp32
board = esp32-s3-devkitc1-n16r8 board = esp32-s3-devkitc1-n16r8
build_type = release build_type = release
board_build.partitions = esp32_3MB.csv board_build.partitions = default_8MB.csv
board_build.flash_mode = qio board_build.flash_mode = qio
board_build.f_flash = 80000000L board_build.f_flash = 80000000L
board_build.arduino.memory_type = qio_opi board_build.arduino.memory_type = qio_opi