From a5afcfaceaf59e7ceac0ce8afdfde6ff2045e113 Mon Sep 17 00:00:00 2001 From: "R. Sid Shaytay" <352722946+r-sidshaytay@users.noreply.github.com> Date: Fri, 6 Nov 2026 12:36:18 -0800 Subject: [PATCH] build: match Plus profile to standard upstream S3 layout --- README.md | 5 +++-- platformio.ini | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index 019ac0a..c0451fd 100644 --- a/README.md +++ b/README.md @@ -108,8 +108,9 @@ pio run -e lilygo-t-embed-cc1101-plus -t buildfs ``` The images are in `.pio/build/lilygo-t-embed-cc1101-plus/`. This environment reuses -`esp32_3MB.csv`. A device with another partition layout needs USB provisioning with -a fresh recovery backup and current rolling codes; firmware-only OTA cannot migrate +`default_8MB.csv`, matching the generic S3 release: two 3.1875 MiB firmware slots +and a 1.5 MiB filesystem. The upper 8 MiB stays unallocated. A device with another +partition layout needs USB provisioning with a fresh recovery backup and current rolling codes; firmware-only OTA cannot migrate the layout. Do not substitute a generic S3 image for this profile. Bugs and ideas go to the [issues](https://github.com/cjkas/ESPSomfy-RTS/issues); security problems go through [SECURITY.md](SECURITY.md). diff --git a/platformio.ini b/platformio.ini index 8b82071..385d47a 100644 --- a/platformio.ini +++ b/platformio.ini @@ -103,7 +103,7 @@ build_flags = extends = esp32 board = esp32-s3-devkitc1-n16r8 build_type = release -board_build.partitions = esp32_3MB.csv +board_build.partitions = default_8MB.csv board_build.flash_mode = qio board_build.f_flash = 80000000L board_build.arduino.memory_type = qio_opi