diff --git a/Configuring-the-Software.md b/Configuring-the-Software.md
index ac720b2..342ea86 100644
--- a/Configuring-the-Software.md
+++ b/Configuring-the-Software.md
@@ -175,6 +175,11 @@ There are a number of tilt mechanisms supported by ESPSomfy RTS.  If this is a b
 
 All types except garage doors add support for Sun/Wind sensors that retract an awning or close the drapes whenever the sun goes away.  The also often contain a wind function that can ensure your precious butterfly wing awning attached to the house does not become your neighbor's awning.  Selecting Sun Sensor on the configuration panel adds controls for turning on or off the sun function.  For the sensor to work properly you will need to link it to the motor using the link remote function.  After all, this sensor operates as if it were a remote.
 
+When a sensor is triggered for a windy condition ESPSomfy RTS will display an exclamation indicator on the shade display.  This will remain until the sensor sends information that the windy condition has subsided.  If a linked sensor sends a sunny condition a sun indicator will appear on the icon display.  Below is an awning that has experienced a sunny and windy condition.  Even though there is a sunny condition the awning has been retracted to protect it from the wind.  **NOTE:** If you have these indicators erroneously on your display and you do not have a sensor, then you likely triggered these on the virtual remote page.  To clear them send a sensor command from the virtual remote without any of the checkboxes checked.
+
+![image](https://github.com/rstrouse/ESPSomfy-RTS/assets/47839015/29b6e969-1865-43d5-8bb2-661e00b36ba6)
+
+
 ![image](https://github.com/rstrouse/ESPSomfy-RTS/assets/47839015/eb5ff23b-27d5-419d-80ee-409941f9174e)
 
 ### Name