mirror of
https://github.com/rstrouse/ESPSomfy-RTS.git
synced 2025-12-15 03:52:11 +01:00
Updated Configuring the Software (markdown)
parent
a93da86b8a
commit
9ca33be45a
1 changed files with 11 additions and 1 deletions
|
|
@ -139,8 +139,9 @@ Sun and wind sensors can be connected to any motor. However, not all motors pro
|
|||
|  | Drapery (right) | A sliding rod at the top of the opening that pulls from the right to the left to close the drapery. | Up, Down, My, Sun |
|
||||
|  | Drapery (center) | A sliding rod at the top of the opening that uses two panels pulling from the left and right to close the drapery. | Up, Down, My, Sun |
|
||||
|  | Awning | A horizontal mechanism that extends and retracts from a fixed point to cover an area underneath. | Up, Down, My, Sun |
|
||||
|  | Garage (1-button) | A garage door motor that has only one toggle function. NOTE: You should first try using the 3-button version as this type provides the best experience and most garage door motors actually use the up, down, and stop functions. | Toggle, Light |
|
||||
|  | Garage (1-button) | A garage door motor that has only one toggle function. NOTE: You should first try using the 3-button version as this type provides the best experience and most garage door motors and actually use the up, down, and stop functions. | Toggle, Light |
|
||||
|  | Garage (3-button) | A garage door motor that uses up, down, and stop buttons. | Up, Down, My, Light |
|
||||
|  | Dry Contact | Dry contact RTS devices that toggle relays | Toggle |
|
||||
|
||||
There are a number of tilt mechanisms supported by ESPSomfy RTS. If this is a blind with a tilt function you should select the appropriate type of tilt mechanism that is used on the motor. These are described below.
|
||||
* ***None*** - The slats of the blind are manually controlled or not controllable remotely.
|
||||
|
|
@ -297,6 +298,15 @@ Unpair the shade from the group
|
|||
# Ordering Shades and Groups
|
||||
After you get done adding all your shades an groups you may find that the order in which they are shown in the web display is not to your liking. Initially, these are in the order in which they are added to the device. You can change this order by navigating to the Shades and/or Groups tab. Then simply drag each one into the order in which you would like them to appear.
|
||||
|
||||
# Virtual Remote
|
||||
So you are one of those poor souls that left your remote sitting on the trunk of your car and drove away. Or the remote has managed to have an illicit affair with one of the lost socks from the dryer and ran away to a far off land. There have been a number of requests to be able to use ESPSomfy RTS without a remote for a variety of reasons.
|
||||
|
||||
Among other things this is where the Virtual Remote tab comes into play. You can use this tab just like a regular remote allowing you to use button combinations and different length presses. So if you have no remote factory reset your motor then select the shade you set up for it from the dropdown and get it all paired up. Using the button combinations you can also set the motor limits as well as pair other remotes. You can even simulate the existence of a Sunis or Eolis device.
|
||||
|
||||
Just a reminder. Ensure you select the shade you want to control from the dropdown at the top!
|
||||
|
||||

|
||||
|
||||
# Backup and Restore
|
||||
You may back up the settings on your ESPSomfy RTS device at any time using the backup function. Originally, this function backed up only the Shades and Groups settings but starting with v2.1.6 this function also backs up the Radio Settings, System Options, and Network configuration. However, this function will not back up the following items:
|
||||
* WiFi connection (SSID or Passphrase)
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue