From 61694d5d527ef6ac55239400462174dcff0da784 Mon Sep 17 00:00:00 2001
From: rstrouse <47839015+rstrouse@users.noreply.github.com>
Date: Sun, 30 Jul 2023 09:19:21 -0700
Subject: [PATCH] Updated Configuring the Software (markdown)

---
 Configuring-the-Software.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Configuring-the-Software.md b/Configuring-the-Software.md
index 23337d4..d55f778 100644
--- a/Configuring-the-Software.md
+++ b/Configuring-the-Software.md
@@ -128,7 +128,7 @@ Next select the type of motor you are adding.  This can be a Roller Shade, Blind
 There are a number of tilt mechanisms supported by ESPSomfy RTS.  If this is a blind with a tilt function you should select the appropriate type of tilt mechanism that is used on the motor.  These are described below.
 * ***None*** - The slats of the blind are manually controlled or not controllable remotely.
 * ***Tilt Motor*** - The motor assembly is actually two motors in one where a long press on the remote moves the slats open or closed and a short press raises or lowers the blind.
-* ***Integrated*** - When the up button is pressed the slats fully open before the motor raises the blind.  Conversely, the down button fully closes the slats before lowering the blind.
+* ***Integrated*** - When the up button is pressed the slats fully open before the motor raises the blind.  Conversely, the down button fully closes the slats before lowering the blind.  This allows the slats to be tilted with the blind in any lift position.
 
 Awnings add support for Sun/Wind sensors that retract the awning whenever the sun goes away or the wind may damage your precious butterfly wing attached to the house.  Selecting Awning as the motor type will add these options to the interface and integrations.  For the sensor to work properly you will need to link it to the motor using the link remote function.  After all this sensor operates as if it were a remote.