Updated Simple ESPSomfy RTS device (markdown)

rstrouse 2023-03-22 18:39:01 -07:00
parent 1813795bb7
commit 2433187df4

@ -107,7 +107,7 @@ This little board uses power over ethernet so you can run one cable to the devic
| 5 | SCK | GPIO 14 |
| 6 | MOSI | GPIO 15 |
| 7 | MISO | GPIO 16 |
| 8 | GDO2 - This is the TX pin | GPIO 36 |
| 8 | GDO2 - This is the RX pin | GPIO 36 |
## LilyGO T-Internet POE
So where do these names come from. Anyway, this is another PoE card. You will need the programmer card to load the initial firmware but after that it can sit in a drawer so years from now you pick it up and think... "what is this to?". You know like that key to something you don't know what it belongs to. Again there are not many pins available but there are just enough to get the transceiver hooked up.
@ -116,12 +116,12 @@ So where do these names come from. Anyway, this is another PoE card. You will
| --- | ----------- | ------- |
| 1 | GND | GND |
| 2 | VCC | 3v3 |
| 3 | GDO0 - This is the RX Pin | GPIO 35 |
| 3 | GDO0 - This is the TX Pin | GPIO 35 |
| 4 | CSN | GPIO 12 |
| 5 | SCK | GPIO 14 |
| 6 | MOSI | GPIO 15 |
| 7 | MISO | GPIO 16 |
| 8 | GDO2 - This is the TX pin | GPIO 04 |
| 8 | GDO2 - This is the RX pin | GPIO 04 |
## wESP POE
This is an interesting little board in that it it seems to have quite a few more pins available. It also has a cool logo of a paper wasp that has no function whatsoever but it is well done. Like some of the other options, you need to buy the serial converter to load the initial firmware and toss it in the drawer.