ESPSomfy-RTS/src
R. Sid Shaytay fdf840a236 feat: support headless LILYGO T-Embed CC1101 Plus
Configure the integrated radio power, shared SPI selects, RF path and fixed wiring without changing generic boards. Preload output latches for Arduino 3 and publish radio availability only after register and RX checks succeed. Reuse the existing partition table and protect integrated, USB and PSRAM pins across configuration and GPIO output paths.

Exercise production setup, RX and queue admission methods in a hardware-boundary host harness, run it in CI and document the opt-in build. Keep restore policy, security corrections and release tooling outside this board-only change.
2026-11-14 18:33:33 -08:00
..
entryPoints fix: review fixes for the OTA slot 2026-10-28 22:19:27 +01:00
outputs Merge origin/main into test/config-records 2026-10-29 18:02:56 +01:00
ApiToken.h fix: review findings on the token key 2026-10-27 20:39:08 +01:00
BoardProfile.cpp feat: support headless LILYGO T-Embed CC1101 Plus 2026-11-14 18:33:33 -08:00
BoardProfile.h feat: support headless LILYGO T-Embed CC1101 Plus 2026-11-14 18:33:33 -08:00
BootPins.h fix: warn of radio pins that block flashing over USB 2026-10-29 22:54:11 +01:00
ConfigFile.cpp feat: support headless LILYGO T-Embed CC1101 Plus 2026-11-14 18:33:33 -08:00
ConfigFile.h fix: review fixes for the shades.cfg records 2026-10-29 17:25:07 +01:00
ConfigHeader.h fix: stop the 5 s boot wait, tell the client about a bad restore 2026-10-19 18:08:16 +02:00
ConfigRecords.cpp fix: review fixes for the shades.cfg records 2026-10-29 17:25:07 +01:00
ConfigRecords.h fix: review fixes for the boot pin warnings 2026-10-29 22:44:23 +01:00
ConfigSettings.cpp fix: review fixes for the ESP32-P4 build 2026-10-29 20:10:36 +01:00
ConfigSettings.h chore: bump version to v4.0.2 2026-11-01 12:04:18 +00:00
DeviceOps.cpp build: add the ESP32-P4 (#29) 2026-10-29 19:41:39 +01:00
DeviceOps.h fix: settings ops review findings 2026-10-25 10:27:53 +01:00
ESPNetwork.cpp chore: name cjkas as the manufacturer in MQTT discovery and SSDP 2026-10-31 13:27:45 +01:00
ESPNetwork.h fix: review fixes for step 4a 2026-10-27 22:11:54 +01:00
EthPhy.h fix: review fixes for the ESP32-P4 build 2026-10-29 20:10:36 +01:00
HttpAccess.h fix: close the token bypass below a route, review fixes for 4b 2026-10-28 19:39:51 +01:00
ItemSnapshot.cpp feat!: remove the old API, ports 8081 and 8080 (step 4a) 2026-10-27 21:49:38 +01:00
ItemSnapshot.h feat!: remove the old API, ports 8081 and 8080 (step 4a) 2026-10-27 21:49:38 +01:00
JsonFormatter.cpp feat: socket protocol 2 core on ws://host/ws 2026-10-24 11:03:07 +02:00
JsonFormatter.h feat: socket protocol 2 core on ws://host/ws 2026-10-24 11:03:07 +02:00
LoginThrottle.h fix: review findings on the login throttle 2026-10-27 18:44:39 +01:00
LogLock.cpp build: move to pioarduino 55.03.312 (Arduino 3.3.12, ESP-IDF 5.5) 2026-10-19 22:05:22 +02:00
LogLockPolicy.h fix: don't wait on a log lock holder that can't run 2026-10-12 18:35:42 +02:00
LoopQueue.cpp feat!: remove the old API, ports 8081 and 8080 (step 4a) 2026-10-27 21:49:38 +01:00
LoopQueue.h feat!: remove the old API, ports 8081 and 8080 (step 4a) 2026-10-27 21:49:38 +01:00
ModelEditor.cpp fix: deletes send their removal after the reply; test_reboot waits for the restart 2026-10-25 13:07:17 +01:00
ModelEditor.h feat!: remove the old API, ports 8081 and 8080 (step 4a) 2026-10-27 21:49:38 +01:00
MqttConnection.cpp fix: only touch the task watchdog from tasks that are subscribed to it 2026-10-21 13:45:04 +02:00
MqttConnection.h refactor: split the transports into the modules GLOSSARY.md names 2026-10-16 13:47:56 +02:00
MqttDisco.cpp chore: name cjkas as the manufacturer in MQTT discovery and SSDP 2026-10-31 13:27:45 +01:00
MqttDisco.h test: Home Assistant discovery config on the PC 2026-10-29 16:59:53 +01:00
MqttTopics.h fix: review fixes for the shades.cfg records 2026-10-29 17:25:07 +01:00
ProtoAssembly.cpp fix: edit ops review findings 2026-10-24 18:10:06 +02:00
ProtoAssembly.h fix: edit ops review findings 2026-10-24 18:10:06 +02:00
ProtoEdits.cpp feat: settings ops, the WiFi and frequency scans, and reboot for socket protocol 2 2026-10-25 09:52:09 +01:00
ProtoEdits.h fix: edit ops second review findings 2026-10-24 18:29:34 +02:00
ProtoFrame.cpp fix: protocol 2 core review findings 2026-10-24 13:17:15 +02:00
ProtoFrame.h fix: edit ops review findings 2026-10-24 18:10:06 +02:00
ProtoOps.cpp fix: edit ops second review findings 2026-10-24 18:29:34 +02:00
ProtoOps.h fix: edit ops second review findings 2026-10-24 18:29:34 +02:00
ProtoParse.cpp feat: settings ops, the WiFi and frequency scans, and reboot for socket protocol 2 2026-10-25 09:52:09 +01:00
ProtoParse.h feat: settings ops, the WiFi and frequency scans, and reboot for socket protocol 2 2026-10-25 09:52:09 +01:00
ProtoSchema.cpp fix: edit ops review findings 2026-10-24 18:10:06 +02:00
ProtoSchema.h fix: review fixes for the OTA slot 2026-10-28 22:19:27 +01:00
ProtoSettings.cpp fix: review fixes for the ESP32-P4 build 2026-10-29 20:10:36 +01:00
ProtoSettings.h feat: settings ops, the WiFi and frequency scans, and reboot for socket protocol 2 2026-10-25 09:52:09 +01:00
ProtoSlots.cpp fix: protocol 2 core review findings 2026-10-24 13:17:15 +02:00
ProtoSlots.h fix: protocol 2 core review findings 2026-10-24 13:17:15 +02:00
ProtoSync.cpp fix: protocol 2 core review findings 2026-10-24 13:17:15 +02:00
ProtoSync.h feat!: remove the old API, ports 8081 and 8080 (step 4a) 2026-10-27 21:49:38 +01:00
PulseDecoder.cpp refactor: move the RX pulse decoder into PulseDecoder 2026-10-13 21:21:05 +02:00
PulseDecoder.h refactor: move the RX pulse decoder into PulseDecoder 2026-10-13 21:21:05 +02:00
RadioScheduler.cpp refactor: name radio jobs as GLOSSARY.md does 2026-10-13 15:13:03 +02:00
RadioScheduler.h refactor: name radio jobs as GLOSSARY.md does 2026-10-13 15:13:03 +02:00
RollingCode.h fix: review fixes for the shades.cfg records 2026-10-29 17:25:07 +01:00
Secrets.h fix: keep stored secrets when an older UI sends them empty 2026-10-18 20:07:31 +02:00
ShadeBehaviour.cpp cleanup: drop the step cases onWaitingFrame never reaches 2026-10-17 23:25:16 +02:00
ShadeBehaviour.h fix: keep a tilt-only shade's lift at 100 whatever sends the command 2026-10-16 22:47:53 +02:00
ShadeChanges.cpp refactor: send shade and group changes once per loop() pass 2026-10-16 10:40:44 +02:00
ShadeChanges.h feat!: remove the old API, ports 8081 and 8080 (step 4a) 2026-10-27 21:49:38 +01:00
ShadeController.cpp feat!: remove the old API, ports 8081 and 8080 (step 4a) 2026-10-27 21:49:38 +01:00
ShadeGpio.cpp feat: support headless LILYGO T-Embed CC1101 Plus 2026-11-14 18:33:33 -08:00
ShadeMotion.cpp fix: default a set-favorite request's tilt to the favorite tilt 2026-10-14 15:57:49 +02:00
ShadeMotion.h fix: default a set-favorite request's tilt to the favorite tilt 2026-10-14 15:57:49 +02:00
ShadeRequests.cpp fix: command op replies that said ok when nothing was done 2026-10-24 13:46:00 +02:00
ShadeRequests.h fix: command op replies that said ok when nothing was done 2026-10-24 13:46:00 +02:00
ShadeSensors.cpp fix: move only the tilt of a tilt-only shade for sun and wind 2026-10-13 21:14:20 +02:00
ShadeSensors.h fix: move only the tilt of a tilt-only shade for sun and wind 2026-10-13 21:14:20 +02:00
ShadeSettings.h refactor: hold shade settings in ShadeSettings and RemoteSettings 2026-10-16 20:31:39 +02:00
ShadeTypes.h refactor: move the shade's behaviour into ShadeBehaviour 2026-10-16 21:21:38 +02:00
Somfy.h feat!: remove the old API, ports 8081 and 8080 (step 4a) 2026-10-27 21:49:38 +01:00
SomfyController.cpp feat: support headless LILYGO T-Embed CC1101 Plus 2026-11-14 18:33:33 -08:00
SomfyEditor.h feat!: remove the old API, ports 8081 and 8080 (step 4a) 2026-10-27 21:49:38 +01:00
SomfyFrame.cpp refactor: move the shade's behaviour into ShadeBehaviour 2026-10-16 21:21:38 +02:00
SomfyFrame.h refactor: move the shade's behaviour into ShadeBehaviour 2026-10-16 21:21:38 +02:00
SomfyGroup.cpp refactor: hold shade settings in ShadeSettings and RemoteSettings 2026-10-16 20:31:39 +02:00
SomfyJson.cpp feat: support headless LILYGO T-Embed CC1101 Plus 2026-11-14 18:33:33 -08:00
SomfyRemote.cpp refactor: move the shade's behaviour into ShadeBehaviour 2026-10-16 21:21:38 +02:00
SomfyShade.cpp refactor: move the shade's behaviour into ShadeBehaviour 2026-10-16 21:21:38 +02:00
SomfyShadeOps.cpp fix: command op replies that said ok when nothing was done 2026-10-24 13:46:00 +02:00
SomfyShadeOps.h refactor: carry out shade requests from one module behind a LoopQueue 2026-10-16 09:42:58 +02:00
SomfySnapshot.cpp feat!: remove the old API, ports 8081 and 8080 (step 4a) 2026-10-27 21:49:38 +01:00
SomfySnapshot.h feat!: remove the old API, ports 8081 and 8080 (step 4a) 2026-10-27 21:49:38 +01:00
SSDP.cpp feat: keep Ethernet settings independent of the framework 2026-10-19 21:13:49 +02:00
SSDP.h init 2026-03-10 20:23:48 +01:00
TaskWdt.h fix: only touch the task watchdog from tasks that are subscribed to it 2026-10-21 13:45:04 +02:00
Timing.h refactor: time steps with ElapsedTimer::lap() 2026-10-13 15:39:14 +02:00
Transceiver.cpp feat: support headless LILYGO T-Embed CC1101 Plus 2026-11-14 18:33:33 -08:00
Transceiver.h feat: support headless LILYGO T-Embed CC1101 Plus 2026-11-14 18:33:33 -08:00
TxBuffer.cpp test: cover the radio queue rules, shade TX state, rolling codes and web command hold 2026-10-12 20:26:33 +02:00
TxBuffer.h refactor: name radio jobs as GLOSSARY.md does 2026-10-13 15:13:03 +02:00
Utils.cpp feat!: remove the old API, ports 8081 and 8080 (step 4a) 2026-10-27 21:49:38 +01:00
Utils.h build: add the ESP32-P4 (#29) 2026-10-29 19:41:39 +01:00
WResp.cpp feat!: remove the old API, ports 8081 and 8080 (step 4a) 2026-10-27 21:49:38 +01:00
WResp.h feat!: remove the old API, ports 8081 and 8080 (step 4a) 2026-10-27 21:49:38 +01:00