mirror of
https://github.com/rstrouse/ESPSomfy-RTS.git
synced 2026-10-31 22:02:17 +01:00
325da6bd9f
The p_* setters and emitState() no longer publish or emit straight away:
they set SHADE_CHANGED_* / GROUP_CHANGED_* bits on the shade or group.
At the end of every loop() pass SomfyShadeController::sendChanges()
publishes the MQTT topics whose bits are set and sends one shadeState or
groupState, then clears the bits. emitState(evt) with an event name and
emitState(num) for one client still go out at once.
publishShadeTopics() (ShadeChanges.cpp, tested natively) writes the topics
from a shade snapshot; publishState() on connect uses it too. That fixes
MQTT position and target, a constant 50 since c94819e, and direction, a
constant 0 on connect. position and tiltPosition are now retained when
they change, as they were on connect, and a group whose flags change sends
one groupState instead of two. somfy_flags_t moves to ShadeTypes.h.
8 new native tests, 327 in all. Flash: esp32devdbg +196 bytes, esp32dev
+228 bytes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
121 lines
3.9 KiB
INI
121 lines
3.9 KiB
INI
; PlatformIO Project Configuration File
|
|
;
|
|
; Build options: build flags, source filter
|
|
; Upload options: custom upload port, speed and extra flags
|
|
; Library options: dependencies, extra library storages
|
|
; Advanced options: extra scripting
|
|
;
|
|
; Please visit documentation for the other options and examples
|
|
; https://docs.platformio.org/page/projectconf.html
|
|
|
|
[platformio]
|
|
default_envs = esp32devdbg
|
|
src_dir = src
|
|
|
|
; Shared by every firmware env (they extend it). Kept out of [env] so the
|
|
; native test env doesn't inherit the Arduino framework and ESP32 libraries.
|
|
[esp32]
|
|
platform = espressif32 @ 6.13.0
|
|
framework = arduino
|
|
; Unit tests only run on the PC: pio test -e native
|
|
test_ignore = *
|
|
lib_deps =
|
|
bblanchon/ArduinoJson@^7.2.2
|
|
lsatan/SmartRC-CC1101-Driver-Lib@^2.5.7
|
|
knolleary/PubSubClient@^2.8
|
|
esp32async/ESPAsyncWebServer@^3.10.3
|
|
esp32async/AsyncTCP@^3.4.10
|
|
extra_scripts =
|
|
pre:app_version.py
|
|
pre:minify.py
|
|
post:archive_elf.py
|
|
board_build.filesystem = littlefs
|
|
build_flags =
|
|
-DCORE_DEBUG_LEVEL=3
|
|
-DCONFIG_ESP_COREDUMP_ENABLE_TO_FLASH=1
|
|
-DCONFIG_ESP_COREDUMP_DATA_FORMAT_ELF=1
|
|
-DCONFIG_ESP_COREDUMP_CHECKSUM_CRC32=1
|
|
-DCONFIG_ESP_TASK_WDT_PANIC=1
|
|
-DCONFIG_ESP_COREDUMP_DECODE_INFO=1
|
|
; Route log_printfv through src/LogLock.cpp so lines from both cores don't
|
|
; interleave. The core already wraps log_printf for ESP Insights.
|
|
-Wl,--wrap=log_printfv
|
|
monitor_speed = 115200
|
|
monitor_filters =
|
|
time
|
|
esp32_exception_decoder
|
|
log2file
|
|
|
|
; Dual-core targets: keep the async web/socket task on core 0 so the radio
|
|
; task on core 1 (with loop()) never competes with network handling.
|
|
[dualcore]
|
|
build_flags =
|
|
${esp32.build_flags}
|
|
-DCONFIG_ASYNC_TCP_RUNNING_CORE=0
|
|
|
|
[env:esp32dev]
|
|
extends = esp32
|
|
board = esp32dev
|
|
board_build.partitions = esp32_3MB.csv
|
|
build_flags = ${dualcore.build_flags}
|
|
|
|
[env:esp32devdbg]
|
|
extends = esp32
|
|
board = esp32dev
|
|
build_type = debug
|
|
; One 3 MB app slot and no OTA: the debug build is never shipped and outgrew
|
|
; the 1.5 MB OTA slot. Release envs keep esp32_3MB.csv. NVS stays at 0x9000
|
|
; but the file system shrinks, so moving a board to this table means: take a
|
|
; backup, flash over USB with -t upload -t uploadfs, then restore the backup.
|
|
board_build.partitions = esp32_huge_app.csv
|
|
; -Og only limits inlining in units over large-unit-insns (10000 by default).
|
|
; Smaller files inline ArduinoJson's helpers into every caller, which costs
|
|
; KBs of flash per file, so treat every file as large.
|
|
build_flags =
|
|
${dualcore.build_flags}
|
|
--param=large-unit-insns=1000
|
|
|
|
[env:esp32c3]
|
|
extends = esp32
|
|
board = esp32-c3-devkitm-1
|
|
board_build.partitions = esp32_3MB.csv
|
|
|
|
[env:esp32s3]
|
|
extends = esp32
|
|
board = esp32-s3-devkitc-1
|
|
build_flags = ${dualcore.build_flags}
|
|
|
|
[env:esp32c6]
|
|
extends = esp32
|
|
platform = https://github.com/pioarduino/platform-espressif32/releases/download/stable/platform-espressif32.zip
|
|
board = seeed_xiao_esp32c6
|
|
build_type = debug
|
|
board_build.partitions = esp32_huge_app.csv
|
|
build_flags =
|
|
${esp32.build_flags}
|
|
-DCONFIG_FREERTOS_HZ=1000
|
|
-include "driver/gpio.h"
|
|
lib_deps =
|
|
; Low-Level libs, frameowrks and drivers
|
|
ESP32Async/AsyncTCP
|
|
https://github.com/Viproz/SmartRC-CC1101-Driver-Lib.git
|
|
; Commmunication Protocol
|
|
links2004/WebSockets
|
|
https://github.com/hmueller01/pubsubclient3.git
|
|
; Data-Parsing
|
|
bblanchon/ArduinoJson
|
|
; High-level wrappers/servers
|
|
ESP32Async/ESPAsyncWebServer
|
|
|
|
; Host-side unit tests: pio test -e native (needs gcc/g++ on PATH).
|
|
; Only the sources the tests cover are built; test/stubs stands in for Arduino.h.
|
|
[env:native]
|
|
platform = native
|
|
test_framework = unity
|
|
test_build_src = yes
|
|
build_src_filter = -<*> +<Utils.cpp> +<SomfyFrame.cpp> +<JsonFormatter.cpp> +<ShadeMotion.cpp> +<ShadeSensors.cpp> +<PulseDecoder.cpp> +<TxBuffer.cpp> +<RadioScheduler.cpp> +<ShadeRequests.cpp> +<entryPoints/MqttCommands.cpp> +<ModelSnapshot.cpp> +<ModelEditor.cpp> +<ShadeChanges.cpp>
|
|
build_flags =
|
|
-std=gnu++17
|
|
-Isrc
|
|
-Itest/stubs
|
|
-D_POSIX_THREAD_SAFE_FUNCTIONS
|