mirror of
https://github.com/rstrouse/ESPSomfy-RTS.git
synced 2026-10-31 13:52:15 +01:00
dfb003d2f7
For boards such as Waveshare's ESP32-P4-WIFI6-POE-ETH: WiFi through the board's ESP32-C6 on SDIO (esp-hosted), Ethernet on the P4's RMII MAC with an IP101. Not tested on a device: no P4 board was at hand. - platformio.ini: env esp32p4 (esp32-p4_r3, chip v3.01+) and esp32p4es (esp32-p4, the esp32p4_es libraries, chips before v2.0). An image runs on one of the two only, so each has its own release files, chip models "p4" and "p4es". Both keep the OTA slot: at level 2 they leave about 128 KB of it. - Ethernet clock mode: stored as eth_clock_id_t in the ESP32's numbering and translated by name, like the PHY id. The P4's eth_clock_mode_t is the IDF's emac_rmii_clock_mode_t, whose 0 is a deprecated default; only clock in (GPIO 50) translates there. - P4 Ethernet defaults: the Waveshare wiring (IP101 as TLK110, address 1, MDC 31, MDIO 52, reset 51), board type 8. The ESP32's put MDIO on an SDIO pin. - Settings take pins up to GPIO 54, the P4's last, instead of 48. - Radio defaults: SPI 32/33/27, CSN 46 (the framework's Waveshare variant), TX 2, RX 3. - Web UI: a Waveshare ESP32-P4-ETH preset, the P4's clock mode, pin lists up to GPIO 54 without the pins the C6 link, Ethernet, USB and UART0 use. - CI builds and releases both, with their ELFs; bootloader at 0x2000. - ADR 0003: amended. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
264 lines
9.6 KiB
YAML
264 lines
9.6 KiB
YAML
name: ESPSomfy-RTS Build
|
|
|
|
on:
|
|
push:
|
|
branches: [main]
|
|
pull_request:
|
|
release:
|
|
types: [published]
|
|
|
|
jobs:
|
|
test:
|
|
name: Unit tests
|
|
runs-on: ubuntu-latest
|
|
|
|
steps:
|
|
- name: Check out code
|
|
uses: actions/checkout@v4
|
|
|
|
- name: Set up Python
|
|
uses: actions/setup-python@v5
|
|
with:
|
|
python-version: "3.12"
|
|
|
|
# pioarduino's fork of PlatformIO Core, which the pioarduino platform needs.
|
|
# Pinned: 6.2.0.post1 reports itself as 6.2.0-post.1, which the
|
|
# platform's ">=6.2.0" reads as a pre-release and refuses.
|
|
- name: Install PlatformIO
|
|
run: pip install pioarduino==6.2.0
|
|
|
|
- name: Run native unit tests
|
|
run: pio test -e native
|
|
|
|
webui:
|
|
name: Web UI tests
|
|
runs-on: ubuntu-latest
|
|
|
|
steps:
|
|
- name: Check out code
|
|
uses: actions/checkout@v4
|
|
|
|
- name: Set up Node
|
|
uses: actions/setup-node@v4
|
|
with:
|
|
node-version: "22"
|
|
|
|
# The protocol 2 client (data-src/js) against the recorded fixtures.
|
|
- name: Run web UI tests
|
|
run: node --test "test/js/*.test.js"
|
|
|
|
build:
|
|
# Don't build or publish firmware that fails its tests.
|
|
needs: [test, webui]
|
|
permissions: write-all
|
|
name: ${{ matrix.name }}
|
|
runs-on: ubuntu-latest
|
|
|
|
strategy:
|
|
fail-fast: false
|
|
matrix:
|
|
# fwname: firmware-only binary for OTA updates
|
|
# elfname: the symbols of that binary, to decode a crash's backtrace
|
|
# obname: onboard image (bootloader + partitions + firmware + littlefs merged)
|
|
# for flashing a new chip via USB/serial
|
|
# addr_bootloader: chip-dependent (ESP32: 0x1000, S3/C3/C6: 0x0, C5/P4: 0x2000)
|
|
# addr_fs: must match the spiffs offset in the env's partition table
|
|
# (0x310000 in both esp32_3MB.csv and esp32_huge_app.csv)
|
|
include:
|
|
- env: esp32dev
|
|
name: ESP32
|
|
chip: ESP32
|
|
addr_bootloader: "0x1000"
|
|
addr_fs: "0x310000"
|
|
fwname: SomfyController.ino.esp32.bin
|
|
elfname: SomfyController.ino.esp32.elf
|
|
fsname: SomfyController.littlefs.esp32.bin
|
|
obname: SomfyController.onboard.esp32.bin
|
|
- env: esp32s3
|
|
name: ESP32-S3
|
|
chip: ESP32-S3
|
|
addr_bootloader: "0x0"
|
|
addr_fs: "0x670000"
|
|
fwname: SomfyController.ino.esp32s3.bin
|
|
elfname: SomfyController.ino.esp32s3.elf
|
|
fsname: SomfyController.littlefs.esp32s3.bin
|
|
obname: SomfyController.onboard.esp32s3.bin
|
|
- env: esp32c3
|
|
name: ESP32-C3
|
|
chip: ESP32-C3
|
|
addr_bootloader: "0x0"
|
|
addr_fs: "0x310000"
|
|
fwname: SomfyController.ino.esp32c3.bin
|
|
elfname: SomfyController.ino.esp32c3.elf
|
|
fsname: SomfyController.littlefs.esp32c3.bin
|
|
obname: SomfyController.onboard.esp32c3.bin
|
|
- env: esp32c5
|
|
name: ESP32-C5
|
|
chip: ESP32-C5
|
|
addr_bootloader: "0x2000"
|
|
addr_fs: "0x310000"
|
|
fwname: SomfyController.ino.esp32c5.bin
|
|
elfname: SomfyController.ino.esp32c5.elf
|
|
fsname: SomfyController.littlefs.esp32c5.bin
|
|
obname: SomfyController.onboard.esp32c5.bin
|
|
- env: esp32c6
|
|
name: ESP32-C6
|
|
chip: ESP32-C6
|
|
addr_bootloader: "0x0"
|
|
addr_fs: "0x310000"
|
|
fwname: SomfyController.ino.esp32c6.bin
|
|
elfname: SomfyController.ino.esp32c6.elf
|
|
fsname: SomfyController.littlefs.esp32c6.bin
|
|
obname: SomfyController.onboard.esp32c6.bin
|
|
- env: esp32p4
|
|
name: ESP32-P4
|
|
chip: ESP32-P4
|
|
addr_bootloader: "0x2000"
|
|
addr_fs: "0x310000"
|
|
fwname: SomfyController.ino.esp32p4.bin
|
|
elfname: SomfyController.ino.esp32p4.elf
|
|
fsname: SomfyController.littlefs.esp32p4.bin
|
|
obname: SomfyController.onboard.esp32p4.bin
|
|
- env: esp32p4es
|
|
name: ESP32-P4 (before v3.0)
|
|
chip: ESP32-P4
|
|
addr_bootloader: "0x2000"
|
|
addr_fs: "0x310000"
|
|
fwname: SomfyController.ino.esp32p4es.bin
|
|
elfname: SomfyController.ino.esp32p4es.elf
|
|
fsname: SomfyController.littlefs.esp32p4es.bin
|
|
obname: SomfyController.onboard.esp32p4es.bin
|
|
|
|
steps:
|
|
- name: Get Release
|
|
if: github.event_name == 'release'
|
|
id: get_release
|
|
uses: bruceadams/get-release@v1.3.2
|
|
env:
|
|
GITHUB_TOKEN: ${{ github.token }}
|
|
|
|
- name: Check out code
|
|
uses: actions/checkout@v4
|
|
|
|
- name: Update version from release tag
|
|
if: github.event_name == 'release'
|
|
run: |
|
|
VERSION="${{ github.event.release.tag_name }}"
|
|
VERSION="${VERSION#v}"
|
|
sed -i "s/#define FW_VERSION \"v[0-9.]*\"/#define FW_VERSION \"v${VERSION}\"/" src/ConfigSettings.h
|
|
sed -i "s/^[0-9.].*/${VERSION}/" data-src/appversion
|
|
sed -i "s/\?v=[0-9.]*c/?v=${VERSION}c/g" data-src/index.html
|
|
sed -i "s/appVersion = 'v[0-9.]*'/appVersion = 'v${VERSION}'/" data-src/index.js
|
|
|
|
- name: Commit version update
|
|
if: github.event_name == 'release' && matrix.env == 'esp32dev'
|
|
run: |
|
|
git config user.name "github-actions[bot]"
|
|
git config user.email "github-actions[bot]@users.noreply.github.com"
|
|
git add src/ConfigSettings.h data-src/appversion data-src/index.html data-src/index.js
|
|
git commit -m "chore: bump version to ${{ github.event.release.tag_name }}"
|
|
git push origin HEAD:${{ github.event.release.target_commitish }}
|
|
|
|
- name: Set up Python
|
|
uses: actions/setup-python@v5
|
|
with:
|
|
python-version: "3.12"
|
|
|
|
- name: Install PlatformIO and esptool
|
|
run: pip install pioarduino==6.2.0 esptool
|
|
|
|
- name: Build LittleFS image
|
|
run: pio run -e ${{ matrix.env }} -t buildfs
|
|
|
|
- name: Save LittleFS image
|
|
run: cp .pio/build/${{ matrix.env }}/littlefs.bin littlefs.bin
|
|
|
|
- name: Build firmware
|
|
run: pio run -e ${{ matrix.env }}
|
|
|
|
- name: Check firmware size
|
|
run: python .github/size_check.py .pio/build/${{ matrix.env }} ${{ matrix.env }} 8
|
|
|
|
- name: Restore LittleFS image
|
|
run: cp littlefs.bin .pio/build/${{ matrix.env }}/littlefs.bin
|
|
|
|
- name: List build artifacts
|
|
run: find .pio/build/${{ matrix.env }} -maxdepth 1 -name "*.bin" | sort
|
|
|
|
- name: Create onboard image
|
|
run: |
|
|
python -m esptool --chip ${{ matrix.chip }} \
|
|
merge-bin -o ${{ matrix.obname }} \
|
|
${{ matrix.addr_bootloader }} .pio/build/${{ matrix.env }}/bootloader.bin \
|
|
0x8000 .pio/build/${{ matrix.env }}/partitions.bin \
|
|
0x10000 .pio/build/${{ matrix.env }}/firmware.bin \
|
|
${{ matrix.addr_fs }} .pio/build/${{ matrix.env }}/littlefs.bin
|
|
|
|
- name: Compress onboard image
|
|
run: zip ${{ matrix.obname }}.zip ${{ matrix.obname }}
|
|
|
|
# A panic prints "ELF file SHA256: <first hex digits>". The .sha256 file
|
|
# beside the ELF holds the whole hash, so a crash log shows which build
|
|
# it came from.
|
|
- name: Compress ELF
|
|
run: |
|
|
cp .pio/build/${{ matrix.env }}/firmware.elf ${{ matrix.elfname }}
|
|
sha256sum ${{ matrix.elfname }} > ${{ matrix.elfname }}.sha256
|
|
cat ${{ matrix.elfname }}.sha256
|
|
zip -9 ${{ matrix.elfname }}.zip ${{ matrix.elfname }} ${{ matrix.elfname }}.sha256
|
|
|
|
- name: Upload artifacts
|
|
if: github.event_name != 'release'
|
|
uses: actions/upload-artifact@v4
|
|
with:
|
|
name: ${{ matrix.name }}
|
|
path: |
|
|
.pio/build/${{ matrix.env }}/firmware.bin
|
|
.pio/build/${{ matrix.env }}/firmware.elf
|
|
.pio/build/${{ matrix.env }}/partitions.bin
|
|
.pio/build/${{ matrix.env }}/bootloader.bin
|
|
.pio/build/${{ matrix.env }}/littlefs.bin
|
|
${{ matrix.obname }}.zip
|
|
retention-days: 5
|
|
|
|
- name: Upload LittleFS
|
|
if: github.event_name == 'release'
|
|
uses: shogo82148/actions-upload-release-asset@v1.7.5
|
|
with:
|
|
github_token: ${{ github.token }}
|
|
upload_url: ${{ steps.get_release.outputs.upload_url }}
|
|
asset_name: ${{ matrix.fsname }}
|
|
asset_path: .pio/build/${{ matrix.env }}/littlefs.bin
|
|
overwrite: true
|
|
|
|
- name: Upload firmware
|
|
if: github.event_name == 'release'
|
|
uses: shogo82148/actions-upload-release-asset@v1.7.5
|
|
with:
|
|
github_token: ${{ github.token }}
|
|
upload_url: ${{ steps.get_release.outputs.upload_url }}
|
|
asset_name: ${{ matrix.fwname }}
|
|
asset_path: .pio/build/${{ matrix.env }}/firmware.bin
|
|
overwrite: true
|
|
|
|
- name: Upload onboard image
|
|
if: github.event_name == 'release'
|
|
uses: shogo82148/actions-upload-release-asset@v1.7.5
|
|
with:
|
|
github_token: ${{ github.token }}
|
|
upload_url: ${{ steps.get_release.outputs.upload_url }}
|
|
asset_name: ${{ matrix.obname }}.zip
|
|
asset_path: ${{ matrix.obname }}.zip
|
|
overwrite: true
|
|
asset_content_type: application/zip
|
|
|
|
- name: Upload ELF
|
|
if: github.event_name == 'release'
|
|
uses: shogo82148/actions-upload-release-asset@v1.7.5
|
|
with:
|
|
github_token: ${{ github.token }}
|
|
upload_url: ${{ steps.get_release.outputs.upload_url }}
|
|
asset_name: ${{ matrix.elfname }}.zip
|
|
asset_path: ${{ matrix.elfname }}.zip
|
|
overwrite: true
|
|
asset_content_type: application/zip
|