mirror of
https://github.com/rstrouse/ESPSomfy-RTS.git
synced 2026-10-31 13:52:15 +01:00
b525a800b0
With --reboot, a restore of the radio alone brings it back as it was: on a board without Ethernet it read the radio from the wrong place. --firmware <firmware.bin> updates the device through /updateFirmware and checks it still runs a minute later, after it marks the update good. wait_for_restart compared uptimes, so a test run right after another restart could see more uptime than before and fail. It compares boot times, and waits while the device hasn't restarted yet. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
48 lines
1.6 KiB
Python
48 lines
1.6 KiB
Python
"""A firmware update through /updateFirmware, as the web UI sends it.
|
|
|
|
Pass --firmware with a firmware.bin built for the device's chip, e.g.
|
|
.pio/build/esp32s3/firmware.bin. The device must have an OTA slot: the
|
|
release builds do, the C5, C6 and debug builds don't.
|
|
"""
|
|
import time
|
|
|
|
import pytest
|
|
|
|
from proto_client import run_sync
|
|
from test_routes import auth, upload
|
|
from test_settings import boot_time, wait_for_restart
|
|
|
|
# The new firmware is marked good once it has run this long with the network
|
|
# up; a reset before then boots the old one (docs/adr/0003-pioarduino-idf55.md).
|
|
PROVEN_AFTER_S = 60
|
|
|
|
|
|
@pytest.fixture
|
|
def firmware(request):
|
|
path = request.config.getoption("--firmware")
|
|
if not path:
|
|
pytest.skip("updates the device's firmware: pass --firmware <firmware.bin>")
|
|
with open(path, "rb") as f:
|
|
return f.read()
|
|
|
|
|
|
def test_an_update_restarts_on_the_new_firmware_and_stays(host, token, connect, schema, firmware):
|
|
c = connect(schema=schema.hash)
|
|
_, frames, _ = run_sync(c)
|
|
booted = boot_time(schema, frames)
|
|
c.close()
|
|
|
|
status, _, body = upload(host, "/updateFirmware", auth(token), file=firmware)
|
|
assert status == 200, body
|
|
wait_for_restart(host, token, schema, booted)
|
|
|
|
# Past the point where it is marked good it is still running, and hasn't
|
|
# restarted on the old firmware.
|
|
c = connect(schema=schema.hash)
|
|
_, frames, _ = run_sync(c)
|
|
restarted = boot_time(schema, frames)
|
|
c.close()
|
|
time.sleep(PROVEN_AFTER_S + 10)
|
|
c = connect(schema=schema.hash)
|
|
_, frames, _ = run_sync(c)
|
|
assert abs(boot_time(schema, frames) - restarted) < 5, "the device restarted again"
|