mirror of
https://github.com/rstrouse/ESPSomfy-RTS.git
synced 2026-10-31 13:52:15 +01:00
92e69d599f
GPIO2 on the original ESP32, 46 on the S2/S3 and 8 on the C3/C6 don't stop a normal boot, but held at the wrong level at reset they keep esptool from starting the download mode. The WT32-ETH01 wiring puts TX on GPIO2. Each warning now says what the pin does and what to do: move it for a pin that stops the boot, disconnect it to flash for one that only blocks USB. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
60 lines
2.8 KiB
JavaScript
60 lines
2.8 KiB
JavaScript
// The radio pins that can stop the board booting (data-src/js/pins.js).
|
|
const test = require('node:test');
|
|
const assert = require('node:assert/strict');
|
|
const { BootPins } = require('../../data-src/js/pins.js');
|
|
|
|
// transceiver_config_t::load()'s defaults for the original ESP32.
|
|
const esp32Defaults = { SCKPin: 18, CSNPin: 5, MOSIPin: 23, MISOPin: 19, TXPin: 13, RXPin: 35 };
|
|
|
|
test('the original ESP32 defaults are safe', () => {
|
|
assert.deepEqual(BootPins.radioWarnings('', esp32Defaults), []);
|
|
});
|
|
|
|
test('RX on GPIO12 warns of the flash voltage on the original ESP32', () => {
|
|
// Issue #34.
|
|
const warnings = BootPins.radioWarnings('', Object.assign({}, esp32Defaults, { RXPin: 12 }));
|
|
assert.equal(warnings.length, 1);
|
|
assert.match(warnings[0], /^RX is on GPIO-12/);
|
|
assert.match(warnings[0], /1\.8 V/);
|
|
});
|
|
|
|
test('TX on GPIO2 warns of flashing over USB on the original ESP32', () => {
|
|
// The WT32-ETH01 wiring in the wiki.
|
|
const warnings = BootPins.radioWarnings('', Object.assign({}, esp32Defaults, { TXPin: 2 }));
|
|
assert.equal(warnings.length, 1);
|
|
assert.match(warnings[0], /^TX is on GPIO-2, .*Held high, it stops flashing over USB, so disconnect it to flash\.$/);
|
|
});
|
|
|
|
test('GPIO8 held low blocks flashing on the C3 and C6', () => {
|
|
const config = { SCKPin: 4, CSNPin: 7, MOSIPin: 6, MISOPin: 5, TXPin: 10, RXPin: 8 };
|
|
for (const chip of ['c3', 'c6']) {
|
|
const warnings = BootPins.radioWarnings(chip, config);
|
|
assert.equal(warnings.length, 1);
|
|
assert.match(warnings[0], /^RX is on GPIO-8, .*Held low, it stops flashing over USB/);
|
|
}
|
|
});
|
|
|
|
test('an unknown chip model warns of nothing', () => {
|
|
assert.deepEqual(BootPins.radioWarnings('h2', Object.assign({}, esp32Defaults, { RXPin: 12 })), []);
|
|
});
|
|
|
|
test('a missing chip model is the original ESP32', () => {
|
|
assert.equal(BootPins.radioWarnings(null, Object.assign({}, esp32Defaults, { TXPin: 0 })).length, 1);
|
|
});
|
|
|
|
test('GPIO12 is safe on the S3', () => {
|
|
assert.deepEqual(BootPins.radioWarnings('s3', { SCKPin: 12, CSNPin: 10, MOSIPin: 11, MISOPin: 13, TXPin: 15, RXPin: 14 }), []);
|
|
});
|
|
|
|
test('MISO and TX warn, the pins the radio only reads do not', () => {
|
|
const config = { SCKPin: 4, CSNPin: 0, MOSIPin: 1, MISOPin: 9, TXPin: 10, RXPin: 3 };
|
|
assert.deepEqual(BootPins.radioWarnings('c3', config).map((w) => w.split(' ')[0]), ['MISO']);
|
|
assert.deepEqual(BootPins.radioWarnings('c6', Object.assign({}, config, { MISOPin: 2, TXPin: 9, RXPin: 9 })).map((w) => w.split(' ')[0]),
|
|
['TX']);
|
|
});
|
|
|
|
test('the pre-v3 P4 has the P4 pins', () => {
|
|
const p4 = { SCKPin: 27, CSNPin: 46, MOSIPin: 32, MISOPin: 33, TXPin: 2, RXPin: 35 };
|
|
assert.equal(BootPins.radioWarnings('p4', p4).length, 1);
|
|
assert.deepEqual(BootPins.radioWarnings('p4es', p4), BootPins.radioWarnings('p4', p4));
|
|
});
|