mirror of
https://github.com/rstrouse/ESPSomfy-RTS.git
synced 2026-10-31 22:02:17 +01:00
77703a9855
/controller, /discovery, /rooms, /shades, /groups, /room, /shade and /group now take a SnapshotSlots slot, queue a fill on the LoopQueue and send a chunked response whose body waits (RESPONSE_TRY_AGAIN) until loop() has copied the shade model into the slot. SnapshotWriter then streams the document from that copy a unit at a time, so each document describes one moment. At most two reads run at once; a third gets 503. A slot's 5.6 KB snapshot is allocated only while a read holds it, and its atomic state decides whether loop() or the read frees it when the read goes away first. The JSON of each item is unchanged and now lives in ModelSnapshot.cpp, where the native tests check it. Replies still written on the web server task copy their one item with SomfySnapshot.cpp, so serializing a group no longer calls updateFlags(), which emitted groupState and published MQTT from async_tcp. Also: every read route is chunked and leaves out an item too big for its 3 KB unit, like /controller did; /discovery drops its timing log; the SOMFY_MAX_* limits move to ShadeTypes.h. 21 new native tests, 292 in all. Flash: esp32devdbg +440 bytes, esp32dev +2,064 bytes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
117 lines
3.5 KiB
INI
117 lines
3.5 KiB
INI
; PlatformIO Project Configuration File
|
|
;
|
|
; Build options: build flags, source filter
|
|
; Upload options: custom upload port, speed and extra flags
|
|
; Library options: dependencies, extra library storages
|
|
; Advanced options: extra scripting
|
|
;
|
|
; Please visit documentation for the other options and examples
|
|
; https://docs.platformio.org/page/projectconf.html
|
|
|
|
[platformio]
|
|
default_envs = esp32devdbg
|
|
src_dir = src
|
|
|
|
; Shared by every firmware env (they extend it). Kept out of [env] so the
|
|
; native test env doesn't inherit the Arduino framework and ESP32 libraries.
|
|
[esp32]
|
|
platform = espressif32 @ 6.13.0
|
|
framework = arduino
|
|
; Unit tests only run on the PC: pio test -e native
|
|
test_ignore = *
|
|
lib_deps =
|
|
bblanchon/ArduinoJson@^7.2.2
|
|
lsatan/SmartRC-CC1101-Driver-Lib@^2.5.7
|
|
knolleary/PubSubClient@^2.8
|
|
esp32async/ESPAsyncWebServer@^3.10.3
|
|
esp32async/AsyncTCP@^3.4.10
|
|
extra_scripts =
|
|
pre:app_version.py
|
|
pre:minify.py
|
|
post:archive_elf.py
|
|
board_build.filesystem = littlefs
|
|
build_flags =
|
|
-DCORE_DEBUG_LEVEL=3
|
|
-DCONFIG_ESP_COREDUMP_ENABLE_TO_FLASH=1
|
|
-DCONFIG_ESP_COREDUMP_DATA_FORMAT_ELF=1
|
|
-DCONFIG_ESP_COREDUMP_CHECKSUM_CRC32=1
|
|
-DCONFIG_ESP_TASK_WDT_PANIC=1
|
|
-DCONFIG_ESP_COREDUMP_DECODE_INFO=1
|
|
; Route log_printfv through src/LogLock.cpp so lines from both cores don't
|
|
; interleave. The core already wraps log_printf for ESP Insights.
|
|
-Wl,--wrap=log_printfv
|
|
monitor_speed = 115200
|
|
monitor_filters =
|
|
time
|
|
esp32_exception_decoder
|
|
log2file
|
|
|
|
; Dual-core targets: keep the async web/socket task on core 0 so the radio
|
|
; task on core 1 (with loop()) never competes with network handling.
|
|
[dualcore]
|
|
build_flags =
|
|
${esp32.build_flags}
|
|
-DCONFIG_ASYNC_TCP_RUNNING_CORE=0
|
|
|
|
[env:esp32dev]
|
|
extends = esp32
|
|
board = esp32dev
|
|
board_build.partitions = esp32_3MB.csv
|
|
build_flags = ${dualcore.build_flags}
|
|
|
|
[env:esp32devdbg]
|
|
extends = esp32
|
|
board = esp32dev
|
|
build_type = debug
|
|
board_build.partitions = esp32_3MB.csv
|
|
; -Og only limits inlining in units over large-unit-insns (10000 by default).
|
|
; Smaller files inline ArduinoJson's helpers into every caller, which costs
|
|
; KBs of flash per file, so treat every file as large.
|
|
build_flags =
|
|
${dualcore.build_flags}
|
|
--param=large-unit-insns=1000
|
|
|
|
[env:esp32c3]
|
|
extends = esp32
|
|
board = esp32-c3-devkitm-1
|
|
board_build.partitions = esp32_3MB.csv
|
|
|
|
[env:esp32s3]
|
|
extends = esp32
|
|
board = esp32-s3-devkitc-1
|
|
build_flags = ${dualcore.build_flags}
|
|
|
|
[env:esp32c6]
|
|
extends = esp32
|
|
platform = https://github.com/pioarduino/platform-espressif32/releases/download/stable/platform-espressif32.zip
|
|
board = seeed_xiao_esp32c6
|
|
build_type = debug
|
|
board_build.partitions = esp32_huge_app.csv
|
|
build_flags =
|
|
${esp32.build_flags}
|
|
-DCONFIG_FREERTOS_HZ=1000
|
|
-include "driver/gpio.h"
|
|
lib_deps =
|
|
; Low-Level libs, frameowrks and drivers
|
|
ESP32Async/AsyncTCP
|
|
https://github.com/Viproz/SmartRC-CC1101-Driver-Lib.git
|
|
; Commmunication Protocol
|
|
links2004/WebSockets
|
|
https://github.com/hmueller01/pubsubclient3.git
|
|
; Data-Parsing
|
|
bblanchon/ArduinoJson
|
|
; High-level wrappers/servers
|
|
ESP32Async/ESPAsyncWebServer
|
|
|
|
; Host-side unit tests: pio test -e native (needs gcc/g++ on PATH).
|
|
; Only the sources the tests cover are built; test/stubs stands in for Arduino.h.
|
|
[env:native]
|
|
platform = native
|
|
test_framework = unity
|
|
test_build_src = yes
|
|
build_src_filter = -<*> +<Utils.cpp> +<SomfyFrame.cpp> +<JsonFormatter.cpp> +<ShadeMotion.cpp> +<ShadeSensors.cpp> +<PulseDecoder.cpp> +<TxBuffer.cpp> +<RadioScheduler.cpp> +<ShadeRequests.cpp> +<entryPoints/MqttCommands.cpp> +<ModelSnapshot.cpp>
|
|
build_flags =
|
|
-std=gnu++17
|
|
-Isrc
|
|
-Itest/stubs
|
|
-D_POSIX_THREAD_SAFE_FUNCTIONS
|