mirror of
https://github.com/rstrouse/ESPSomfy-RTS.git
synced 2026-10-31 22:02:17 +01:00
a1622e652d
IDF 4.4 gets no more security fixes, and the planned RMT radio needs IDF 5's RMT driver. See docs/adr/0003-pioarduino-idf55.md. - Every env on one pinned pioarduino release. C6 drops its own library list and flags but stays a debug build on huge_app. - Release envs build at CORE_DEBUG_LEVEL=2 so the ESP32 image fits its 1.5 MB OTA slot (17 KB free); debug envs stay at 3. - Drop the C3: its image is 76.5 KB over the OTA slot on IDF 5.5. - CI installs pioarduino's Core and checks firmware.bin against the app partition, failing under 8 KB free. PlatformIO's "Flash:" figure reads ~45 KB low and passed a C3 image that doesn't fit. - esp_task_wdt_reconfigure(): on 3.x the core already starts the watchdog and esp_task_wdt_init() fails, so the C6 build kept the 5 s default. - An updated firmware is kept only once it has run 60 s with the network up; a reset before then rolls back to the previous one. - ETH.begin() takes the 3.x argument order; Arduino 2.x branches gone. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
113 lines
3.8 KiB
INI
113 lines
3.8 KiB
INI
; PlatformIO Project Configuration File
|
|
;
|
|
; Build options: build flags, source filter
|
|
; Upload options: custom upload port, speed and extra flags
|
|
; Library options: dependencies, extra library storages
|
|
; Advanced options: extra scripting
|
|
;
|
|
; Please visit documentation for the other options and examples
|
|
; https://docs.platformio.org/page/projectconf.html
|
|
|
|
[platformio]
|
|
default_envs = esp32devdbg
|
|
src_dir = src
|
|
|
|
; Shared by every firmware env (they extend it). Kept out of [env] so the
|
|
; native test env doesn't inherit the Arduino framework and ESP32 libraries.
|
|
[esp32]
|
|
; pioarduino: Arduino 3.3.12 on ESP-IDF 5.5. Pinned to a release so an
|
|
; upgrade is its own PR (docs/adr/0003-pioarduino-idf55.md).
|
|
platform = https://github.com/pioarduino/platform-espressif32/releases/download/55.03.312/platform-espressif32.zip
|
|
framework = arduino
|
|
; Unit tests only run on the PC: pio test -e native
|
|
test_ignore = *
|
|
lib_deps =
|
|
bblanchon/ArduinoJson@^7.2.2
|
|
lsatan/SmartRC-CC1101-Driver-Lib@^2.5.7
|
|
knolleary/PubSubClient@^2.8
|
|
esp32async/ESPAsyncWebServer@^3.12.1
|
|
esp32async/AsyncTCP@^3.5.0
|
|
extra_scripts =
|
|
pre:app_version.py
|
|
pre:minify.py
|
|
post:archive_elf.py
|
|
board_build.filesystem = littlefs
|
|
; Each env adds a CORE_DEBUG_LEVEL: 2 (warnings) for release builds, which
|
|
; only fit the 1.5 MB OTA slot without the info logs, 3 for debug builds.
|
|
build_flags =
|
|
-DCONFIG_ESP_COREDUMP_ENABLE_TO_FLASH=1
|
|
-DCONFIG_ESP_COREDUMP_DATA_FORMAT_ELF=1
|
|
-DCONFIG_ESP_COREDUMP_CHECKSUM_CRC32=1
|
|
-DCONFIG_ESP_TASK_WDT_PANIC=1
|
|
-DCONFIG_ESP_COREDUMP_DECODE_INFO=1
|
|
; Route log_printfv through src/LogLock.cpp so lines from both cores don't
|
|
; interleave. The core already wraps log_printf for ESP Insights.
|
|
-Wl,--wrap=log_printfv
|
|
monitor_speed = 115200
|
|
monitor_filters =
|
|
time
|
|
esp32_exception_decoder
|
|
log2file
|
|
|
|
; Dual-core targets: keep the async web/socket task on core 0 so the radio
|
|
; task on core 1 (with loop()) never competes with network handling.
|
|
[dualcore]
|
|
build_flags =
|
|
${esp32.build_flags}
|
|
-DCONFIG_ASYNC_TCP_RUNNING_CORE=0
|
|
|
|
[env:esp32dev]
|
|
extends = esp32
|
|
board = esp32dev
|
|
board_build.partitions = esp32_3MB.csv
|
|
build_flags =
|
|
${dualcore.build_flags}
|
|
-DCORE_DEBUG_LEVEL=2
|
|
|
|
[env:esp32devdbg]
|
|
extends = esp32
|
|
board = esp32dev
|
|
build_type = debug
|
|
; One 3 MB app slot and no OTA: the debug build is never shipped and outgrew
|
|
; the 1.5 MB OTA slot. Release envs keep esp32_3MB.csv. NVS stays at 0x9000
|
|
; but the file system shrinks, so moving a board to this table means: take a
|
|
; backup, flash over USB with -t upload -t uploadfs, then restore the backup.
|
|
board_build.partitions = esp32_huge_app.csv
|
|
; -Og only limits inlining in units over large-unit-insns (10000 by default).
|
|
; Smaller files inline ArduinoJson's helpers into every caller, which costs
|
|
; KBs of flash per file, so treat every file as large.
|
|
build_flags =
|
|
${dualcore.build_flags}
|
|
-DCORE_DEBUG_LEVEL=3
|
|
--param=large-unit-insns=1000
|
|
|
|
[env:esp32s3]
|
|
extends = esp32
|
|
board = esp32-s3-devkitc-1
|
|
build_flags =
|
|
${dualcore.build_flags}
|
|
-DCORE_DEBUG_LEVEL=2
|
|
|
|
; Released as a debug build with one 3 MB app slot, so C6 boards update over
|
|
; USB, not OTA.
|
|
[env:esp32c6]
|
|
extends = esp32
|
|
board = seeed_xiao_esp32c6
|
|
build_type = debug
|
|
board_build.partitions = esp32_huge_app.csv
|
|
build_flags =
|
|
${esp32.build_flags}
|
|
-DCORE_DEBUG_LEVEL=3
|
|
|
|
; Host-side unit tests: pio test -e native (needs gcc/g++ on PATH).
|
|
; Only the sources the tests cover are built; test/stubs stands in for Arduino.h.
|
|
[env:native]
|
|
platform = native
|
|
test_framework = unity
|
|
test_build_src = yes
|
|
build_src_filter = -<*> +<Utils.cpp> +<SomfyFrame.cpp> +<JsonFormatter.cpp> +<ShadeMotion.cpp> +<ShadeSensors.cpp> +<ShadeBehaviour.cpp> +<PulseDecoder.cpp> +<TxBuffer.cpp> +<RadioScheduler.cpp> +<ShadeRequests.cpp> +<entryPoints/MqttCommands.cpp> +<ModelSnapshot.cpp> +<ModelEditor.cpp> +<ShadeChanges.cpp>
|
|
build_flags =
|
|
-std=gnu++17
|
|
-Isrc
|
|
-Itest/stubs
|
|
-D_POSIX_THREAD_SAFE_FUNCTIONS
|