mirror of
https://github.com/rstrouse/ESPSomfy-RTS.git
synced 2026-10-31 13:52:15 +01:00
4f8eac03ac
PR B of SHADE_BEHAVIOUR_PLAN.md. What a shade does with frames, commands, group commands and radio events moves unchanged from SomfyShade into ShadeBehaviour, which builds natively and is pinned by test_shadebehaviour. ShadeBehaviour reads ShadeSettings and RemoteSettings, gets the time on every input, and holds the motion state that other files now read through state(). It sends through MotorLink and reports through ShadeEvents (changes, commands, save wanted, sensor flags) as things happen. SomfyShade wraps it: its MotorLink is SomfyRemote::sendCommandAfter, which now leaves the sender out of the echo and radio hold because the module hears its own frame. lastFrame stays shared with the send path. ConfigFile writes through restore() and clearTilt(), SomfyShadeOps through setPosition(). The pinning tests label where the copies of a rule disagree "today:", for the reconcile phase. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
121 lines
3.9 KiB
INI
121 lines
3.9 KiB
INI
; PlatformIO Project Configuration File
|
|
;
|
|
; Build options: build flags, source filter
|
|
; Upload options: custom upload port, speed and extra flags
|
|
; Library options: dependencies, extra library storages
|
|
; Advanced options: extra scripting
|
|
;
|
|
; Please visit documentation for the other options and examples
|
|
; https://docs.platformio.org/page/projectconf.html
|
|
|
|
[platformio]
|
|
default_envs = esp32devdbg
|
|
src_dir = src
|
|
|
|
; Shared by every firmware env (they extend it). Kept out of [env] so the
|
|
; native test env doesn't inherit the Arduino framework and ESP32 libraries.
|
|
[esp32]
|
|
platform = espressif32 @ 6.13.0
|
|
framework = arduino
|
|
; Unit tests only run on the PC: pio test -e native
|
|
test_ignore = *
|
|
lib_deps =
|
|
bblanchon/ArduinoJson@^7.2.2
|
|
lsatan/SmartRC-CC1101-Driver-Lib@^2.5.7
|
|
knolleary/PubSubClient@^2.8
|
|
esp32async/ESPAsyncWebServer@^3.10.3
|
|
esp32async/AsyncTCP@^3.4.10
|
|
extra_scripts =
|
|
pre:app_version.py
|
|
pre:minify.py
|
|
post:archive_elf.py
|
|
board_build.filesystem = littlefs
|
|
build_flags =
|
|
-DCORE_DEBUG_LEVEL=3
|
|
-DCONFIG_ESP_COREDUMP_ENABLE_TO_FLASH=1
|
|
-DCONFIG_ESP_COREDUMP_DATA_FORMAT_ELF=1
|
|
-DCONFIG_ESP_COREDUMP_CHECKSUM_CRC32=1
|
|
-DCONFIG_ESP_TASK_WDT_PANIC=1
|
|
-DCONFIG_ESP_COREDUMP_DECODE_INFO=1
|
|
; Route log_printfv through src/LogLock.cpp so lines from both cores don't
|
|
; interleave. The core already wraps log_printf for ESP Insights.
|
|
-Wl,--wrap=log_printfv
|
|
monitor_speed = 115200
|
|
monitor_filters =
|
|
time
|
|
esp32_exception_decoder
|
|
log2file
|
|
|
|
; Dual-core targets: keep the async web/socket task on core 0 so the radio
|
|
; task on core 1 (with loop()) never competes with network handling.
|
|
[dualcore]
|
|
build_flags =
|
|
${esp32.build_flags}
|
|
-DCONFIG_ASYNC_TCP_RUNNING_CORE=0
|
|
|
|
[env:esp32dev]
|
|
extends = esp32
|
|
board = esp32dev
|
|
board_build.partitions = esp32_3MB.csv
|
|
build_flags = ${dualcore.build_flags}
|
|
|
|
[env:esp32devdbg]
|
|
extends = esp32
|
|
board = esp32dev
|
|
build_type = debug
|
|
; One 3 MB app slot and no OTA: the debug build is never shipped and outgrew
|
|
; the 1.5 MB OTA slot. Release envs keep esp32_3MB.csv. NVS stays at 0x9000
|
|
; but the file system shrinks, so moving a board to this table means: take a
|
|
; backup, flash over USB with -t upload -t uploadfs, then restore the backup.
|
|
board_build.partitions = esp32_huge_app.csv
|
|
; -Og only limits inlining in units over large-unit-insns (10000 by default).
|
|
; Smaller files inline ArduinoJson's helpers into every caller, which costs
|
|
; KBs of flash per file, so treat every file as large.
|
|
build_flags =
|
|
${dualcore.build_flags}
|
|
--param=large-unit-insns=1000
|
|
|
|
[env:esp32c3]
|
|
extends = esp32
|
|
board = esp32-c3-devkitm-1
|
|
board_build.partitions = esp32_3MB.csv
|
|
|
|
[env:esp32s3]
|
|
extends = esp32
|
|
board = esp32-s3-devkitc-1
|
|
build_flags = ${dualcore.build_flags}
|
|
|
|
[env:esp32c6]
|
|
extends = esp32
|
|
platform = https://github.com/pioarduino/platform-espressif32/releases/download/stable/platform-espressif32.zip
|
|
board = seeed_xiao_esp32c6
|
|
build_type = debug
|
|
board_build.partitions = esp32_huge_app.csv
|
|
build_flags =
|
|
${esp32.build_flags}
|
|
-DCONFIG_FREERTOS_HZ=1000
|
|
-include "driver/gpio.h"
|
|
lib_deps =
|
|
; Low-Level libs, frameowrks and drivers
|
|
ESP32Async/AsyncTCP
|
|
https://github.com/Viproz/SmartRC-CC1101-Driver-Lib.git
|
|
; Commmunication Protocol
|
|
links2004/WebSockets
|
|
https://github.com/hmueller01/pubsubclient3.git
|
|
; Data-Parsing
|
|
bblanchon/ArduinoJson
|
|
; High-level wrappers/servers
|
|
ESP32Async/ESPAsyncWebServer
|
|
|
|
; Host-side unit tests: pio test -e native (needs gcc/g++ on PATH).
|
|
; Only the sources the tests cover are built; test/stubs stands in for Arduino.h.
|
|
[env:native]
|
|
platform = native
|
|
test_framework = unity
|
|
test_build_src = yes
|
|
build_src_filter = -<*> +<Utils.cpp> +<SomfyFrame.cpp> +<JsonFormatter.cpp> +<ShadeMotion.cpp> +<ShadeSensors.cpp> +<ShadeBehaviour.cpp> +<PulseDecoder.cpp> +<TxBuffer.cpp> +<RadioScheduler.cpp> +<ShadeRequests.cpp> +<entryPoints/MqttCommands.cpp> +<ModelSnapshot.cpp> +<ModelEditor.cpp> +<ShadeChanges.cpp>
|
|
build_flags =
|
|
-std=gnu++17
|
|
-Isrc
|
|
-Itest/stubs
|
|
-D_POSIX_THREAD_SAFE_FUNCTIONS
|