NTPSettings::apply() waited up to 5 s in getLocalTime() for a clock that
can't be set before the network is up, then returned before it set TZ.
Every cold boot was 5 s slower and ran without its time zone. It now
calls configTzTime(), which sets the zone and starts SNTP without
waiting, and save() goes through apply(). /setgeneral checked
ntpServer twice, so a request that changed only the zone was ignored.
A restore ignored the result of ShadeConfigFile::restore() and rebooted
either way, so a bad file failed with no word to the user. The /restore
reply now validates the file and answers 400, which the restore dialog
shows, and an incomplete upload gets a 400 instead of no reply. A
failed restore changes nothing, so loop() no longer reboots after one.
/shades.tmp, a full copy of the backup with its rolling codes, is
deleted after every restore and after /updateShadeConfig.
The 6 extra bytes in the 2026-10-18 backup: TRANS_REC_SIZE stayed 74
when noiseDetection was added to the 80-byte transceiver record, so
every backup since declares it short. It is 80 now. The size check
stays a warning so those backups still restore, and the sum moves to
expectedFileBytes() with tests. The repeater record length is checked
as a warning only, since validate() also runs on shades.cfg at boot.
Commands for an unknown shade, tilt or group now log a warning, and a
socket that never pinged says so. KNOWN_ISSUES.md is updated, including
the real cause of the ~365 ms loop stall (radio_tx busy-waits each frame
on loop()'s core).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Socket events that don't fit the static buffer are logged and not sent.
The state events are small (shadeState is about 400 bytes), but
remoteFrame lists up to 300 pulse timings and real frames already came
to 1.8-2.1 KB against the 2 KB buffer. MAX_SOCK_RESPONSE is now 4096 in
SocketEmitter.h, and a static_assert next to remoteFrame fails the build
if 300 pulses of 10 digits no longer fit. KNOWN_ISSUES.md closes the
entry with the bounds of every event.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Code moves unchanged; only files and names change.
- entryPoints/WebUiRoutes.cpp: registerWebUiRoutes(), the port 80 routes
and the UI's files, with the helpers only they use.
- entryPoints/ApiRoutes.cpp: registerApiRoutes(), the port 8081 routes.
- entryPoints/Web.cpp keeps the servers' lifecycle, auth and the handlers
both route sets call; entryPoints/WebRoutes.h is what the three share.
- entryPoints/MQTT.* -> MqttConnection.*, class MQTTClass -> MqttConnection.
- outputs/SomfyMqtt.cpp -> outputs/MqttPublisher.cpp.
- outputs/Sockets.* -> outputs/SocketEmitter.*.
The subscribe and unsubscribe lists (the latter repeated
groups/+/direction/set) become MqttCommands' MQTT_COMMAND_TOPICS, and a
native test checks the parser takes every topic in it. GLOSSARY.md gains
MqttConnection and Change fan-out.
328 native tests. Flash: esp32devdbg +3,112 bytes (the routes are a second
ArduinoJson file), esp32dev -2,336 bytes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
