- data-src/js: ProtoSchema (schema from the sync, short keys and names,
defaults, cached by hash), ProtoModel (rooms, shades, groups, repeaters,
header and status from the sync and the events) and ProtoClient (/ws,
hello, sync with next, op() as a Promise of its reply, events, feeds,
reconnect). Nothing uses them yet: 2b moves the UI onto them.
- minify.py joins js/*.js and index.js into index.js, and the three CSS
files into app.css, so a page load opens fewer connections.
- test/js: node --test on the three modules, replaying the recorded
fixtures; a CI job runs it and the firmware build waits for it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The release check, release list, download, cancel and
/recoverFilesystem go, with the GitHub button and the Auto Check for
Updates setting in the web UI (docs/adr/0007-no-github-update.md).
The HTTPS session it needed failed for want of a 35-40 KB block (#76),
it checked no certificate, and the web UI's buttons had been getting
404. Updates are uploads only (/updateFirmware, /updateApplication).
The old socket still sends fwStatus with the installed versions, which
the web UI and Home Assistant read. checkForUpdate stays in NVS and the
backup file so their formats don't change.
The release image shrinks by 126.5 KB: 142 KB of the OTA slot is free.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Prepares the move to Arduino 3.x / ESP-IDF 5.5, which renumbers
eth_phy_type_t (ETH_PHY_GENERIC is now 0) and only has the RMII MAC
API on the original ESP32.
- Store the PHY chip as our own id (eth_phy_id_t, the 2.x values) and
translate it by name at ETH.begin(), so NVS, backups and the web UI
keep their numbers on either framework.
- Build Ethernet only where CONFIG_ETH_USE_ESP32_EMAC is set instead of
everywhere but the C6. C3 and S3 could never use it. A stored
Ethernet connection falls back to Wi-Fi on those chips.
- /networksettings reports hasEthernet; the UI hides the Ethernet
options without it.
- Fix the UI PHY list: 5 is the KSZ8041, add the KSZ8081 (6), drop the
DM9051, an SPI chip the MAC can't drive.
- SSDP takes its address from WiFi/ETH.localIP() instead of the
tcpip_adapter API IDF 5 removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Firmware and UI files update separately, so an old index.js can run
against firmware that no longer returns secrets. It sends "" for the
field it can't fill in, which cleared the WiFi passphrase (reboot into
AP mode) or the MQTT password.
The firmware now decides: "" keeps the stored secret, unless the same
request changes the SSID or MQTT username, then it clears it (open
network). /setNetwork compares the settings after applying them, so a
kept passphrase no longer triggers a reboot. The UI cache-buster moves
to 3.0.14d.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The settings routes returned the WiFi passphrase, MQTT password and the
login password and PIN in plain text, and the debug log printed them and
the API key. Responses now carry hasPassphrase/hasPassword/hasPin flags,
logs mask the values, and an omitted secret keeps the stored one.
The UI loads secret fields empty and treats a blank field as "keep" while
the SSID or username is unchanged. Clearing a secret without changing the
SSID or username is listed in docs/KNOWN_ISSUES.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The RTW decoder formula encKey - 133 was off by one versus the
RTW encoder (which maps command N to encKey N + 132). This caused
every non-My RTW command to decode as the wrong button (e.g. Up
decoded as My, Down as MyUp). Also adds rawCmd diagnostic field to
received frames for protocol debugging.
