GPIO2 on the original ESP32, 46 on the S2/S3 and 8 on the C3/C6 don't stop
a normal boot, but held at the wrong level at reset they keep esptool from
starting the download mode. The WT32-ETH01 wiring puts TX on GPIO2.
Each warning now says what the pin does and what to do: move it for a pin
that stops the boot, disconnect it to flash for one that only blocks USB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
GPIO12 is a strapping pin on the original ESP32: high at reset, it powers
the flash at 1.8 V. A CC1101 can hold GDO2 high at power-up, so a board
with RX on 12 bootloops after a power cut until EN is pressed. It was the
default RX pin.
- RX defaults to GPIO35 on the original ESP32. Saved settings keep their
pins.
- The log warns each time the radio starts, and the radio settings show a
warning, while TX, RX or MISO is on a pin whose level at reset can stop
the chip booting (src/BootPins.h, data-src/js/pins.js).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
