Only loop() is subscribed. setConnected() runs on the WiFi event task
and reached SocketEmitter::endEmit(), whose plain esp_task_wdt_reset()
logged "esp_task_wdt_reset(707): task not found" on every boot. The web
and socket handlers on async_tcp did the same.
/scanaps on async_tcp called esp_task_wdt_add(NULL) after the scan,
subscribing a task that nothing resets, so the board could panic 15 s
after a scan from the UI.
TaskWdt.h resets only a subscribed task and re-adds a task after a long
call only when it was watched before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PR B of SHADE_BEHAVIOUR_PLAN.md. What a shade does with frames, commands,
group commands and radio events moves unchanged from SomfyShade into
ShadeBehaviour, which builds natively and is pinned by test_shadebehaviour.
ShadeBehaviour reads ShadeSettings and RemoteSettings, gets the time on
every input, and holds the motion state that other files now read through
state(). It sends through MotorLink and reports through ShadeEvents
(changes, commands, save wanted, sensor flags) as things happen.
SomfyShade wraps it: its MotorLink is SomfyRemote::sendCommandAfter, which
now leaves the sender out of the echo and radio hold because the module
hears its own frame. lastFrame stays shared with the send path.
ConfigFile writes through restore() and clearTilt(), SomfyShadeOps through
setPosition(). The pinning tests label where the copies of a rule disagree
"today:", for the reconcile phase.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The shade behaviour module (SHADE_BEHAVIOUR_PLAN.md, PR B) reads its
settings through read-only structs, so they get one home each:
RemoteSettings (flipCommands, bitLength, repeats) under SomfyRemote,
shared with groups, and ShadeSettings (types, travel times, step size,
flipPosition, simMy, sunSensor) under SomfyShade. Both are base structs,
so shade->upTime and group->repeats keep working.
A shade's flags byte is split by owner: simMy and sunSensor are settings,
light is a field, and the sun flag, sunny, windy, demo mode and lighted
bits are stateFlags. getFlags()/setFlags() put the byte together and take
it apart for the config file, JSON, MQTT, events and group flags, so
nothing saved or sent changes. Groups keep their own flags byte.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Code moves unchanged; only files and names change.
- entryPoints/WebUiRoutes.cpp: registerWebUiRoutes(), the port 80 routes
and the UI's files, with the helpers only they use.
- entryPoints/ApiRoutes.cpp: registerApiRoutes(), the port 8081 routes.
- entryPoints/Web.cpp keeps the servers' lifecycle, auth and the handlers
both route sets call; entryPoints/WebRoutes.h is what the three share.
- entryPoints/MQTT.* -> MqttConnection.*, class MQTTClass -> MqttConnection.
- outputs/SomfyMqtt.cpp -> outputs/MqttPublisher.cpp.
- outputs/Sockets.* -> outputs/SocketEmitter.*.
The subscribe and unsubscribe lists (the latter repeated
groups/+/direction/set) become MqttCommands' MQTT_COMMAND_TOPICS, and a
native test checks the parser takes every topic in it. GLOSSARY.md gains
MqttConnection and Change fan-out.
328 native tests. Flash: esp32devdbg +3,112 bytes (the routes are a second
ArduinoJson file), esp32dev -2,336 bytes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The p_* setters and emitState() no longer publish or emit straight away:
they set SHADE_CHANGED_* / GROUP_CHANGED_* bits on the shade or group.
At the end of every loop() pass SomfyShadeController::sendChanges()
publishes the MQTT topics whose bits are set and sends one shadeState or
groupState, then clears the bits. emitState(evt) with an event name and
emitState(num) for one client still go out at once.
publishShadeTopics() (ShadeChanges.cpp, tested natively) writes the topics
from a shade snapshot; publishState() on connect uses it too. That fixes
MQTT position and target, a constant 50 since c94819e, and direction, a
constant 0 on connect. position and tiltPosition are now retained when
they change, as they were on connect, and a group whose flags change sends
one groupState instead of two. somfy_flags_t moves to ShadeTypes.h.
8 new native tests, 327 in all. Flash: esp32devdbg +196 bytes, esp32dev
+228 bytes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The 19 routes that changed rooms, shades, groups and repeaters on the web
server task (add, save, delete, link and unlink, setPaired, the sort
orders) now copy their request into a model_edit_t, queue it on the
LoopQueue and reply {status:accepted,requestId:N}. loop() applies it
(SomfyJson.cpp, next to fromJSON) and broadcasts requestResult {requestId,
ok, id, code, desc}. One edit at a time; a second gets 503, a body over
4 KB gets 413.
ModelEditor.h/.cpp holds the rules, tested natively: the lowest free id,
the next sort order, a free remote address, adding to and removing from
the group-member and repeater lists, and the GPIO pin-conflict check. They
replace the getNext*Id/getMax*Order copies, the remote-address search,
the list code and the inline pin checks. The pin check now uses the
protocol being saved and checks every pin against Ethernet, not only up.
/getNextRoom, /getNextShade, /getNextGroup, /groupOptions and a new
/repeaters (the UI already called it) are ModelSnapshot reads.
The web UI's editJSON() sends an edit, waits for its requestResult, then
reads the item back from /shade, /group, /room or /repeaters, so the
callbacks that used the old reply bodies are unchanged. No result within
5 s offers a reload; reads and edits told Busy are retried. It now also
refreshes its lists on shadeAdded/shadeRemoved/groupAdded/groupRemoved
from other clients, and procRoomRemoved keeps the right rooms.
Also fixed: a shade that fails validation is no longer added; linked
repeaters and sort orders are saved; linking reports a full list.
27 new native tests, 319 in all. Flash: esp32devdbg -11,484 bytes,
esp32dev -7,180 bytes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The HTTP servers and MQTT command handling go to src/entryPoints/, the
socket emitter and the MQTT and socket output of shades, groups and rooms
to src/outputs/. GLOSSARY.md names what they become once split:
WebUiRoutes, ApiRoutes and MqttCommands in, MqttPublisher and
SocketEmitter out.
Only files and include paths change. esp32devdbg flash goes from
1,546,405 to 1,546,257 bytes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
