The web UI now uses /ws, one slot per open tab. The tests that fill all 5
slots failed with a timeout while a tab was open; they now skip and say
to close it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The frequency scan ops and reboot run on loop() like every op (ADR 0005).
endFrequencyScan goes to the front of the loop queue, so it never waits
behind an unpair that waits for the scan to end.
- A security save that leaves the device Secured, or changes its mode,
closes every client, the saver too once its reply has gone. None to None
closes nobody.
- proto must be a radio_proto value; frequency, rxBandwidth and deviation
are checked against what the CC1101 can be set to.
- wifiNetworks sends fewer networks instead of none when they don't fit.
- A client WiFi scan doesn't start while the device joins a network.
- rebootTime is set before reboot; cancelSettingsSave is freeSettingsSave.
- PROTOCOL.md: pins that may be -1, and the fields the routes sent that
moved elsewhere. e2e: the WiFi scan test goes by the connection in use.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Step 1d of the protocol 2 core (docs/SECURITY_PLAN.md).
- getSettings/saveSettings by section: general, network, mqtt, security,
radio. A save is the settings route's request, so loop() applies it with
the settings' own fromJSON(). ProtoSettings checks every field first:
kind, range, string length, IP addresses.
- Secrets are only reported as has*. A security save replies with the
client's new token and closes the other sockets; other saves send
settingsChanged to the other clients.
- scanWifi runs an async scan from ESPNetwork, kept apart from the roaming
scan, and wifiNetworks goes to the clients that asked.
- beginFrequencyScan, endFrequencyScan and reboot run at once on async_tcp,
as their routes do: a scan's end mustn't wait in the loop queue behind an
unpair that waits for the scan to end (new op kind 'a').
- e2e: test_settings.py and a --reboot flag.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The edit routes become ops 26-44 (addRoom ... groupSortOrder): ProtoEdits
turns an op's payload into the route's request, full names and real
booleans, and loop() applies it with applyModelEdit() as the route
does. The reply goes to the client that sent it, with an add's new id,
or the route's reason and a shade's validation code; the HTTP routes
keep sending requestResult.
getNextRoom, getNextShade, getNextGroup and groupOptions (45-48) are
answered by loop() from the shade model, through a new LoopQueue item.
Messages that arrive in pieces, a frame over one TCP segment or several
frames, are put back together by ProtoAssembly: one at a time across
clients, up to 4 KB, in a buffer held only while one is on its way.
A message in pieces is now told from its first frame's opcode, which
also stops a fragmented message's last frame drawing a second reply.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
From the review of #100:
- setMyPosition on a moving shade replies busy ("The shade is moving"),
and setPositions with only a tilt, for a shade without one, replies
bad request ("The shade has no tilt"). Both said ok before.
- PROTOCOL.md lists where the ops differ from the routes, and how
sendRemoteCommand is answered.
- The LoopQueue hold comment covers protocol 2 replies and an unpair
held through a frequency scan.
- One shadeRequestIsForGroup() for the group cases; ProtoOps shares one
reader for "one or both" fields and one for ids, and the radio
refused text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
shadeCommand, groupCommand, tiltCommand, repeatCommand, setPositions,
setSensor, setMyPosition, unpairShade, setRollingCode (types 16-24) are
read on async_tcp by ProtoOps and handed to loop() through the
LoopQueue, which replies once the request has run: ok, not found or
radio unavailable. A bad payload, a paused radio or a full queue is
answered straight away. sendRemoteCommand (25) touches nothing of the
shade model, so it goes to the radio from async_tcp like its route.
ShadeRequests::run() now says how a request went, not only whether
the radio took it. An op reads only the fields that were sent, so
setPositions can leave the tilt as it is. The shadeCommand event is
renamed shadeCommanded, since the op has the route's name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A pytest suite run by hand against a device (test/e2e/README.md): hello, the schema and its hash, the sync with next and resync, replies to bad frames, feed subscriptions, the status event, every client syncing at once, a sixth client refused, a page load, and the socket under the device's security mode. It never transmits, changes settings or reboots. --record saves hello, the sync and the schema as fixtures.
PROTOCOL.md now describes the protocol as built.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
