Step 4a of docs/SECURITY_PLAN.md. Port 80 keeps the eleven HTTP routes of
ADR 0006 and the socket at /ws; everything else moved to protocol 2.
- Port 8081 (ApiRoutes) and the socket on 8080 (SocketEmitter) are gone.
Protocol 2 owns its frame buffer and loop-task check.
- Port 80 drops every route the old web UI called: reads, edits,
settings, scans, reboot, /shades.cfg, /discovery. HttpRoutes.cpp holds
what stays.
- ModelSnapshot, SnapshotSlots and the read documents are gone. The item
snapshot types stay, as ItemSnapshot, for events, MQTT and the command
replies.
- Model edits reply only to their protocol 2 op: requestResult goes.
- The settings' toJSON writers, used only by the settings routes, go.
- The _espsomfy_rts._tcp mDNS record moves to port 80, with path=/ws.
- The memory event reports the loop-rate window it closes.
- A deleted room no longer re-publishes its retained MQTT topics.
- e2e: the heap check reads the sync's status; the sync is checked on
its own instead of against /controller.
- README gets an API and ports section.
BREAKING CHANGE: ports 8081 and 8080 and the old HTTP routes are gone.
Home Assistant needs integration 3.0.0 or newer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The frequency scan ops and reboot run on loop() like every op (ADR 0005).
endFrequencyScan goes to the front of the loop queue, so it never waits
behind an unpair that waits for the scan to end.
- A security save that leaves the device Secured, or changes its mode,
closes every client, the saver too once its reply has gone. None to None
closes nobody.
- proto must be a radio_proto value; frequency, rxBandwidth and deviation
are checked against what the CC1101 can be set to.
- wifiNetworks sends fewer networks instead of none when they don't fit.
- A client WiFi scan doesn't start while the device joins a network.
- rebootTime is set before reboot; cancelSettingsSave is freeSettingsSave.
- PROTOCOL.md: pins that may be -1, and the fields the routes sent that
moved elsewhere. e2e: the WiFi scan test goes by the connection in use.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The edit routes become ops 26-44 (addRoom ... groupSortOrder): ProtoEdits
turns an op's payload into the route's request, full names and real
booleans, and loop() applies it with applyModelEdit() as the route
does. The reply goes to the client that sent it, with an add's new id,
or the route's reason and a shade's validation code; the HTTP routes
keep sending requestResult.
getNextRoom, getNextShade, getNextGroup and groupOptions (45-48) are
answered by loop() from the shade model, through a new LoopQueue item.
Messages that arrive in pieces, a frame over one TCP segment or several
frames, are put back together by ProtoAssembly: one at a time across
clients, up to 4 KB, in a buffer held only while one is on its way.
A message in pieces is now told from its first frame's opcode, which
also stops a fragmented message's last frame drawing a second reply.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HTTP routes and MQTT commands now both build a shade request and submit it
to the LoopQueue, which loop() drains into ShadeRequests. ShadeRequests
finds the shade or group, turns client positions into stored ones, checks
ranges and fills in default repeats, and reaches the shades through the
ShadeOps seam: SomfyShadeOps on the device, a recording fake in the native
tests. MqttCommands turns a .../set topic into a shade request.
Behaviour that changes:
- MQTT tiltTarget, mypos, myTiltPos and tiltPosition, and /setPositions,
now honour flipPosition like the other routes.
- MQTT mypos keeps the favorite tilt (was set to 0) and myTiltPos keeps
the favorite lift.
- repeat 0 on /shadeCommand means no repeats, as it did for groups; a
JSON repeat over 127 is capped instead of wrapping to the default.
- Position corrections go through the setters, so MQTT publishes them.
- MQTT commands wait while the radio is full instead of being refused.
- The queue is drained every loop() pass and no longer from inside a
GitHub firmware download.
WebCommand.h is replaced by LoopQueue.h and ShadeRequests.h. 45 new native
tests, 271 in all. Flash: esp32devdbg +976 bytes, esp32dev +1,380 bytes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
