feat: support headless LILYGO T-Embed CC1101 Plus

Configure the integrated radio power, shared SPI selects, RF path and fixed wiring without changing generic boards. Preload output latches for Arduino 3 and publish radio availability only after register and RX checks succeed. Reuse the existing partition table and protect integrated, USB and PSRAM pins across configuration and GPIO output paths.

Exercise production setup, RX and queue admission methods in a hardware-boundary host harness, run it in CI and document the opt-in build. Keep restore policy, security corrections and release tooling outside this board-only change.
This commit is contained in:
R. Sid Shaytay 2026-11-06 01:19:31 -08:00
parent e873dc8309
commit fdf840a236
22 changed files with 715 additions and 31 deletions

View file

@ -98,6 +98,24 @@ build_flags =
${dualcore.build_flags}
-DCORE_DEBUG_LEVEL=2
; Headless LILYGO T-Embed CC1101 Plus with its integrated 433 MHz radio.
[env:lilygo-t-embed-cc1101-plus]
extends = esp32
board = esp32-s3-devkitc1-n16r8
build_type = release
board_build.partitions = esp32_3MB.csv
board_build.flash_mode = qio
board_build.f_flash = 80000000L
board_build.arduino.memory_type = qio_opi
board_build.psram_type = opi
board_upload.flash_size = 16MB
build_flags =
${dualcore.build_flags}
-DCORE_DEBUG_LEVEL=2
-DARDUINO_USB_MODE=1
-DARDUINO_USB_CDC_ON_BOOT=1
-DESPSOMFY_LILYGO_T_EMBED_CC1101_PLUS
[env:esp32c3]
extends = esp32
board = esp32-c3-devkitm-1