diff --git a/README.md b/README.md index c0451fd..b6b2775 100644 --- a/README.md +++ b/README.md @@ -100,7 +100,12 @@ The firmware builds on [pioarduino](https://github.com/pioarduino/platform-espre The headless Plus profile uses the board's integrated CC1101 on the 433 MHz RF path, 16 MB flash and 8 MB OPI PSRAM. It fixes the radio pins and reserves the shared peripheral, USB and flash/PSRAM pins; the display and encoder are not used. -This profile is for the **T-Embed CC1101 Plus**, not the non-Plus board. +Hardware testing was performed on the **T-Embed CC1101 Plus**. The standard +**T-Embed CC1101** is expected to work with the same profile: [LILYGO describes the +Plus](https://lilygo.cc/products/t-embed-cc1101-plus) as that board with an added +nRF24L01, and its [documented radio/power pins](https://github.com/Xinyuan-LilyGO/T-Embed-CC1101/blob/master/examples/utilities.h) +match this profile. The non-Plus CC1101 model has not been tested here. This does +not cover the plain T-Embed without a CC1101. ```bash pio run -e lilygo-t-embed-cc1101-plus diff --git a/src/BoardProfile.h b/src/BoardProfile.h index 882c0e4..cce53dc 100644 --- a/src/BoardProfile.h +++ b/src/BoardProfile.h @@ -11,7 +11,7 @@ constexpr bool integratedRadio = true; constexpr bool integratedRadio = false; #endif -// LILYGO T-Embed CC1101 Plus integrated hardware; not the non-Plus board. +// LILYGO T-Embed CC1101 wiring, hardware-tested on the Plus model. constexpr uint8_t power = 15; constexpr uint8_t sck = 11; constexpr uint8_t mosi = 9;