fix: warn of radio pins that can stop the board booting (#34)

GPIO12 is a strapping pin on the original ESP32: high at reset, it powers
the flash at 1.8 V. A CC1101 can hold GDO2 high at power-up, so a board
with RX on 12 bootloops after a power cut until EN is pressed. It was the
default RX pin.

- RX defaults to GPIO35 on the original ESP32. Saved settings keep their
  pins.
- The log warns each time the radio starts, and the radio settings show a
  warning, while TX, RX or MISO is on a pin whose level at reset can stop
  the chip booting (src/BootPins.h, data-src/js/pins.js).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

test/js/pins.test.js

@@ -0,0 +1,44 @@
+// The radio pins that can stop the board booting (data-src/js/pins.js).
+const test = require('node:test');
+const assert = require('node:assert/strict');
+const { BootPins } = require('../../data-src/js/pins.js');
+
+// transceiver_config_t::load()'s defaults for the original ESP32.
+const esp32Defaults = { SCKPin: 18, CSNPin: 5, MOSIPin: 23, MISOPin: 19, TXPin: 13, RXPin: 35 };
+
+test('the original ESP32 defaults are safe', () => {
+    assert.deepEqual(BootPins.radioWarnings('', esp32Defaults), []);
+});
+
+test('RX on GPIO12 warns of the flash voltage on the original ESP32', () => {
+    // Issue #34.
+    const warnings = BootPins.radioWarnings('', Object.assign({}, esp32Defaults, { RXPin: 12 }));
+    assert.equal(warnings.length, 1);
+    assert.match(warnings[0], /^RX is on GPIO-12/);
+    assert.match(warnings[0], /1\.8 V/);
+});
+
+test('an unknown chip model warns of nothing', () => {
+    assert.deepEqual(BootPins.radioWarnings('h2', Object.assign({}, esp32Defaults, { RXPin: 12 })), []);
+});
+
+test('a missing chip model is the original ESP32', () => {
+    assert.equal(BootPins.radioWarnings(null, Object.assign({}, esp32Defaults, { TXPin: 0 })).length, 1);
+});
+
+test('GPIO12 is safe on the S3', () => {
+    assert.deepEqual(BootPins.radioWarnings('s3', { SCKPin: 12, CSNPin: 10, MOSIPin: 11, MISOPin: 13, TXPin: 15, RXPin: 14 }), []);
+});
+
+test('MISO and TX warn, the pins the radio only reads do not', () => {
+    const config = { SCKPin: 4, CSNPin: 0, MOSIPin: 1, MISOPin: 9, TXPin: 10, RXPin: 3 };
+    assert.deepEqual(BootPins.radioWarnings('c3', config).map((w) => w.split(' ')[0]), ['MISO']);
+    assert.deepEqual(BootPins.radioWarnings('c6', Object.assign({}, config, { MISOPin: 2, TXPin: 9, RXPin: 9 })).map((w) => w.split(' ')[0]),
+        ['TX']);
+});
+
+test('the pre-v3 P4 has the P4 pins', () => {
+    assert.deepEqual(BootPins.radioWarnings('p4es', { SCKPin: 27, CSNPin: 46, MOSIPin: 32, MISOPin: 33, TXPin: 2, RXPin: 35 }),
+        BootPins.radioWarnings('p4', { SCKPin: 27, CSNPin: 46, MOSIPin: 32, MISOPin: 33, TXPin: 2, RXPin: 35 }));
+    assert.equal(BootPins.radioWarnings('p4', { SCKPin: 27, CSNPin: 46, MOSIPin: 32, MISOPin: 33, TXPin: 2, RXPin: 35 }).length, 1);
+});