Port project to use cmake build system.

This permits to develop the project more easily and efficiently than with Arduino iIDE (which is a pain)
Use the latest IDF framework version
Compile for esp32C5 chip

main/ConfigSettings.h

@@ -0,0 +1,212 @@
+#include <ArduinoJson.h>
+#include <ETH.h>
+#ifndef configsettings_h
+#define configsettings_h
+#include "WResp.h"
+#define FW_VERSION "v2.4.7"
+
+#if !CONFIG_ETH_USE_ESP32_EMAC
+typedef enum {
+  ETH_CLOCK_GPIO0_IN,
+  ETH_CLOCK_GPIO0_OUT,
+  ETH_CLOCK_GPIO16_OUT,
+  ETH_CLOCK_GPIO17_OUT
+} eth_clock_mode_t;
+#endif
+
+enum class conn_types_t : byte {
+    unset = 0x00,
+    wifi = 0x01,
+    ethernet = 0x02,
+    ethernetpref = 0x03,
+    ap = 0x04
+};
+
+enum DeviceStatus {
+  DS_OK = 0,
+  DS_ERROR = 1,
+  DS_FWUPDATE = 2
+};
+struct restore_options_t {
+  bool settings = false;
+  bool shades = false;
+  bool network = false;
+  bool transceiver = false;
+  bool repeaters = false;
+  bool mqtt = false;
+  void fromJSON(JsonObject &obj);
+};
+struct appver_t {
+  char name[15] = "";
+  uint8_t major = 0;
+  uint8_t minor = 0;
+  uint8_t build = 0;
+  char suffix[4] = "";
+  void parse(const char *ver);
+  bool toJSON(JsonObject &obj);
+  void toJSON(JsonResponse &json);
+  void toJSON(JsonSockEvent *json);
+  int8_t compare(appver_t &ver);
+  void copy(appver_t &ver);
+};
+
+
+class BaseSettings {
+  public:
+    bool loadFile(const char* filename);
+    bool fromJSON(JsonObject &obj);
+    bool toJSON(JsonObject &obj);
+    void toJSON(JsonResponse &json);
+    bool parseIPAddress(JsonObject &obj, const char *prop, IPAddress *);
+    bool parseValueString(JsonObject &obj, const char *prop, char *dest, size_t size);
+    int parseValueInt(JsonObject &obj, const char *prop, int defVal);
+    double parseValueDouble(JsonObject &obj, const char *prop, double defVal);
+    bool saveFile(const char* filename);
+    bool save();
+    bool load();
+};
+class NTPSettings: BaseSettings {
+  public:
+    char ntpServer[65] = "pool.ntp.org";
+    char posixZone[64] = "";
+    bool fromJSON(JsonObject &obj);
+    bool toJSON(JsonObject &obj);
+    void toJSON(JsonResponse &json);
+    bool apply();
+    bool begin();
+    bool save();
+    bool load();
+    void print();
+};
+class WifiSettings: BaseSettings {
+  public:
+    WifiSettings();
+    bool roaming = true;
+    bool hidden = false;
+    char ssid[65] = "";
+    char passphrase[65] = "";
+    //bool ssdpBroadcast = true;
+    bool begin();
+    bool fromJSON(JsonObject &obj);
+    bool toJSON(JsonObject &obj);
+    void toJSON(JsonResponse &json);
+    String mapEncryptionType(int type);
+    bool ssidExists(const char *ssid);
+    void printNetworks();
+    bool save();
+    bool load();
+    void print();
+    
+};
+class EthernetSettings: BaseSettings {
+  public:
+    EthernetSettings();
+    uint8_t boardType = 0; // These board types are enumerated in the ui and used to set the chip settings.
+    eth_phy_type_t phyType = ETH_PHY_MAX;
+    eth_clock_mode_t CLKMode = ETH_CLOCK_GPIO0_IN;
+    int8_t phyAddress = 0;
+    int8_t PWRPin = 0;
+    int8_t MDCPin = 0;
+    int8_t MDIOPin = 0;
+    
+    bool begin();
+    bool fromJSON(JsonObject &obj);
+    bool toJSON(JsonObject &obj);
+    void toJSON(JsonResponse &json);
+    bool load();
+    bool save();
+    void print();
+    bool usesPin(uint8_t pin);
+};
+class IPSettings: BaseSettings {
+  public:
+    IPSettings();
+    bool dhcp = true;
+    IPAddress ip;
+    IPAddress subnet = IPAddress(255,255,255,0);
+    IPAddress gateway = IPAddress(0,0,0,0);
+    IPAddress dns1 = IPAddress(0,0,0,0);
+    IPAddress dns2 = IPAddress(0,0,0,0);
+    bool begin();
+    bool fromJSON(JsonObject &obj);
+    bool toJSON(JsonObject &obj);
+    void toJSON(JsonResponse &json);
+    bool load();
+    bool save();
+    void print();
+};
+enum class security_types : byte {
+  None = 0x00,
+  PinEntry = 0x01,
+  Password = 0x02
+};
+enum class security_permissions : byte {
+  ConfigOnly = 0x01
+};
+class SecuritySettings: BaseSettings {
+  public:
+    security_types type = security_types::None;
+    char username[33] = "";
+    char password[33] = "";
+    char pin[5] = "";
+    uint8_t permissions = 0;
+    bool begin();
+    bool save();
+    bool load();
+    void print();
+    bool toJSON(JsonObject &obj);
+    void toJSON(JsonResponse &json);
+    bool fromJSON(JsonObject &obj);
+};
+class MQTTSettings: BaseSettings {
+  public:
+    bool enabled = false;
+    bool pubDisco = false;
+    char hostname[65] = "ESPSomfyRTS";
+    char protocol[10] = "mqtt://";
+    uint16_t port = 1883;
+    char username[33] = "";
+    char password[33] = "";
+    char rootTopic[65] = "";
+    char discoTopic[65] = "homeassistant";
+    bool begin();
+    bool save();
+    bool load();
+    bool toJSON(JsonObject &obj);
+    void toJSON(JsonResponse &json);
+    bool fromJSON(JsonObject &obj);
+};
+class ConfigSettings: BaseSettings {
+  public:
+    static void printAvailHeap();
+    char serverId[10] = "";
+    char hostname[32] = "ESPSomfyRTS";
+    char chipModel[10] = "ESP32";
+    conn_types_t connType = conn_types_t::unset;
+    appver_t fwVersion;
+    appver_t appVersion;
+    bool ssdpBroadcast = true;
+    bool checkForUpdate = true;
+    uint8_t status;
+    IPSettings IP;
+    WifiSettings WIFI;
+    EthernetSettings Ethernet;
+    NTPSettings NTP;
+    MQTTSettings MQTT;
+    SecuritySettings Security;
+    bool requiresAuth();
+    bool fromJSON(JsonObject &obj);
+    bool toJSON(JsonObject &obj);
+    void toJSON(JsonResponse &json);
+    bool begin();
+    bool save();
+    bool load();
+    void print();
+    void emitSockets();
+    void emitSockets(uint8_t num);
+    bool toJSON(DynamicJsonDocument &doc);
+    uint16_t calcSettingsRecSize();
+    uint16_t calcNetRecSize();
+    bool getAppVersion();
+};
+#endif