Rename the Plus-only LILYGO profile to the T-Embed CC1101 names

The profile was named for the Plus model only, but the standard T-Embed
CC1101 is expected to run the same firmware. Rename the macro to
ESPSOMFY_LILYGO_T_EMBED_CC1101, the PlatformIO environment to
lilygo-t-embed-cc1101, and the release files to
SomfyController.{ino,littlefs,onboard}.lilygo-t-embed-cc1101.*, so later
merges with downstream builds match by name. The matrix entry reads
"LILYGO T-Embed CC1101 / Plus". Behavior and partitions are unchanged.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
This commit is contained in:
R. Sid Shaytay 2026-11-14 18:35:23 -08:00
parent bfd8c1c7b4
commit 31eda550b9
No known key found for this signature in database
6 changed files with 23 additions and 23 deletions

View file

@ -1,11 +1,11 @@
#include "BoardProfile.h"
#include <SPI.h>
#if defined(ESPSOMFY_LILYGO_T_EMBED_CC1101_PLUS)
#if defined(ESPSOMFY_LILYGO_T_EMBED_CC1101)
#include <driver/gpio.h>
#endif
namespace BoardProfile {
#if defined(ESPSOMFY_LILYGO_T_EMBED_CC1101_PLUS)
#if defined(ESPSOMFY_LILYGO_T_EMBED_CC1101)
static bool initialized = false;
static void output(uint8_t pin, uint8_t level) {

View file

@ -2,16 +2,16 @@
#include <Arduino.h>
namespace BoardProfile {
#if defined(ESPSOMFY_LILYGO_T_EMBED_CC1101_PLUS)
#if defined(ESPSOMFY_LILYGO_T_EMBED_CC1101)
#if !defined(CONFIG_IDF_TARGET_ESP32S3)
#error "The LILYGO T-Embed CC1101 Plus profile requires an ESP32-S3 target"
#error "The LILYGO T-Embed CC1101 / Plus profile requires an ESP32-S3 target"
#endif
constexpr bool integratedRadio = true;
#else
constexpr bool integratedRadio = false;
#endif
// LILYGO T-Embed CC1101 wiring, hardware-tested on the Plus model.
// LILYGO T-Embed CC1101 wiring, hardware-tested on the Plus model; the standard model is expected to match.
constexpr uint8_t power = 15;
constexpr uint8_t sck = 11;
constexpr uint8_t mosi = 9;