Rename the Plus-only LILYGO profile to the T-Embed CC1101 names

The profile was named for the Plus model only, but the standard T-Embed
CC1101 is expected to run the same firmware. Rename the macro to
ESPSOMFY_LILYGO_T_EMBED_CC1101, the PlatformIO environment to
lilygo-t-embed-cc1101, and the release files to
SomfyController.{ino,littlefs,onboard}.lilygo-t-embed-cc1101.*, so later
merges with downstream builds match by name. The matrix entry reads
"LILYGO T-Embed CC1101 / Plus". Behavior and partitions are unchanged.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
This commit is contained in:
R. Sid Shaytay 2026-11-14 18:35:23 -08:00
parent bfd8c1c7b4
commit 31eda550b9
No known key found for this signature in database
6 changed files with 23 additions and 23 deletions

View file

@ -95,9 +95,9 @@ In either mode the socket refuses an upgrade whose `Origin` header doesn't name
## Building
The firmware builds on [pioarduino](https://github.com/pioarduino/platform-espressif32) (Arduino 3.x on ESP-IDF 5.5), not the stock PlatformIO platform. In VS Code use the **pioarduino IDE** extension instead of PlatformIO IDE. On the command line, `pip install pioarduino` gives you `pio`. Run the unit tests with `pio test -e native`. [ADR 0003](docs/adr/0003-pioarduino-idf55.md) explains why.
### Build for LILYGO T-Embed CC1101 Plus
### Build for LILYGO T-Embed CC1101 / Plus
The headless Plus profile uses the board's integrated CC1101 on the 433 MHz RF path,
The headless T-Embed CC1101 profile, for both the Plus and the standard model, uses the board's integrated CC1101 on the 433 MHz RF path,
16 MB flash and 8 MB OPI PSRAM. It fixes the radio pins and reserves the shared
peripheral, USB and flash/PSRAM pins; the display and encoder are not used.
@ -110,11 +110,11 @@ your board revision and any problems.
This refers to the T-Embed CC1101, not the plain T-Embed without the radio.
```bash
pio run -e lilygo-t-embed-cc1101-plus
pio run -e lilygo-t-embed-cc1101-plus -t buildfs
pio run -e lilygo-t-embed-cc1101
pio run -e lilygo-t-embed-cc1101 -t buildfs
```
The images are in `.pio/build/lilygo-t-embed-cc1101-plus/`. This environment reuses
The images are in `.pio/build/lilygo-t-embed-cc1101/`. This environment reuses
`default_8MB.csv`, matching the generic S3 release: two 3.1875 MiB firmware slots
and a 1.5 MiB filesystem. The upper 8 MiB stays unallocated. A device with another
partition layout needs USB provisioning with a fresh recovery backup and current rolling codes; firmware-only OTA cannot migrate