Rename the Plus-only LILYGO profile to the T-Embed CC1101 names

The profile was named for the Plus model only, but the standard T-Embed
CC1101 is expected to run the same firmware. Rename the macro to
ESPSOMFY_LILYGO_T_EMBED_CC1101, the PlatformIO environment to
lilygo-t-embed-cc1101, and the release files to
SomfyController.{ino,littlefs,onboard}.lilygo-t-embed-cc1101.*, so later
merges with downstream builds match by name. The matrix entry reads
"LILYGO T-Embed CC1101 / Plus". Behavior and partitions are unchanged.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
This commit is contained in:
R. Sid Shaytay 2026-11-14 18:35:23 -08:00
parent bfd8c1c7b4
commit 31eda550b9
No known key found for this signature in database
6 changed files with 23 additions and 23 deletions

View file

@ -188,15 +188,15 @@ jobs:
elfname: SomfyController.ino.esp32s3.elf
fsname: SomfyController.littlefs.esp32s3.bin
obname: SomfyController.onboard.esp32s3.bin
- env: lilygo-t-embed-cc1101-plus
name: LILYGO T-Embed CC1101 Plus
- env: lilygo-t-embed-cc1101
name: LILYGO T-Embed CC1101 / Plus
chip: ESP32-S3
addr_bootloader: "0x0"
addr_fs: "0x670000"
fwname: SomfyController.ino.lilygo-t-embed-cc1101-plus.bin
elfname: SomfyController.ino.lilygo-t-embed-cc1101-plus.elf
fsname: SomfyController.littlefs.lilygo-t-embed-cc1101-plus.bin
obname: SomfyController.onboard.lilygo-t-embed-cc1101-plus.bin
fwname: SomfyController.ino.lilygo-t-embed-cc1101.bin
elfname: SomfyController.ino.lilygo-t-embed-cc1101.elf
fsname: SomfyController.littlefs.lilygo-t-embed-cc1101.bin
obname: SomfyController.onboard.lilygo-t-embed-cc1101.bin
- env: esp32c3
name: ESP32-C3
chip: ESP32-C3

View file

@ -95,9 +95,9 @@ In either mode the socket refuses an upgrade whose `Origin` header doesn't name
## Building
The firmware builds on [pioarduino](https://github.com/pioarduino/platform-espressif32) (Arduino 3.x on ESP-IDF 5.5), not the stock PlatformIO platform. In VS Code use the **pioarduino IDE** extension instead of PlatformIO IDE. On the command line, `pip install pioarduino` gives you `pio`. Run the unit tests with `pio test -e native`. [ADR 0003](docs/adr/0003-pioarduino-idf55.md) explains why.
### Build for LILYGO T-Embed CC1101 Plus
### Build for LILYGO T-Embed CC1101 / Plus
The headless Plus profile uses the board's integrated CC1101 on the 433 MHz RF path,
The headless T-Embed CC1101 profile, for both the Plus and the standard model, uses the board's integrated CC1101 on the 433 MHz RF path,
16 MB flash and 8 MB OPI PSRAM. It fixes the radio pins and reserves the shared
peripheral, USB and flash/PSRAM pins; the display and encoder are not used.
@ -110,11 +110,11 @@ your board revision and any problems.
This refers to the T-Embed CC1101, not the plain T-Embed without the radio.
```bash
pio run -e lilygo-t-embed-cc1101-plus
pio run -e lilygo-t-embed-cc1101-plus -t buildfs
pio run -e lilygo-t-embed-cc1101
pio run -e lilygo-t-embed-cc1101 -t buildfs
```
The images are in `.pio/build/lilygo-t-embed-cc1101-plus/`. This environment reuses
The images are in `.pio/build/lilygo-t-embed-cc1101/`. This environment reuses
`default_8MB.csv`, matching the generic S3 release: two 3.1875 MiB firmware slots
and a 1.5 MiB filesystem. The upper 8 MiB stays unallocated. A device with another
partition layout needs USB provisioning with a fresh recovery backup and current rolling codes; firmware-only OTA cannot migrate

View file

@ -98,8 +98,8 @@ build_flags =
${dualcore.build_flags}
-DCORE_DEBUG_LEVEL=2
; Headless LILYGO T-Embed CC1101 Plus with its integrated 433 MHz radio.
[env:lilygo-t-embed-cc1101-plus]
; Headless LILYGO T-Embed CC1101 / Plus with its integrated 433 MHz radio.
[env:lilygo-t-embed-cc1101]
extends = esp32
board = esp32-s3-devkitc1-n16r8
build_type = release
@ -114,7 +114,7 @@ build_flags =
-DCORE_DEBUG_LEVEL=2
-DARDUINO_USB_MODE=1
-DARDUINO_USB_CDC_ON_BOOT=1
-DESPSOMFY_LILYGO_T_EMBED_CC1101_PLUS
-DESPSOMFY_LILYGO_T_EMBED_CC1101
[env:esp32c3]
extends = esp32

View file

@ -1,11 +1,11 @@
#include "BoardProfile.h"
#include <SPI.h>
#if defined(ESPSOMFY_LILYGO_T_EMBED_CC1101_PLUS)
#if defined(ESPSOMFY_LILYGO_T_EMBED_CC1101)
#include <driver/gpio.h>
#endif
namespace BoardProfile {
#if defined(ESPSOMFY_LILYGO_T_EMBED_CC1101_PLUS)
#if defined(ESPSOMFY_LILYGO_T_EMBED_CC1101)
static bool initialized = false;
static void output(uint8_t pin, uint8_t level) {

View file

@ -2,16 +2,16 @@
#include <Arduino.h>
namespace BoardProfile {
#if defined(ESPSOMFY_LILYGO_T_EMBED_CC1101_PLUS)
#if defined(ESPSOMFY_LILYGO_T_EMBED_CC1101)
#if !defined(CONFIG_IDF_TARGET_ESP32S3)
#error "The LILYGO T-Embed CC1101 Plus profile requires an ESP32-S3 target"
#error "The LILYGO T-Embed CC1101 / Plus profile requires an ESP32-S3 target"
#endif
constexpr bool integratedRadio = true;
#else
constexpr bool integratedRadio = false;
#endif
// LILYGO T-Embed CC1101 wiring, hardware-tested on the Plus model.
// LILYGO T-Embed CC1101 wiring, hardware-tested on the Plus model; the standard model is expected to match.
constexpr uint8_t power = 15;
constexpr uint8_t sck = 11;
constexpr uint8_t mosi = 9;

View file

@ -6,7 +6,7 @@ trap 'rm -rf -- "$scratch"' EXIT
compiler="${CXX:-c++}"
common=(-std=c++11 -Wall -Wextra -Werror -Wno-unused-parameter -I"$repo/tests/board-profile" -I"$repo/src")
sources=("$repo/tests/board-profile/board-profile-test.cpp" "$repo/src/BoardProfile.cpp")
"$compiler" "${common[@]}" -DESPSOMFY_LILYGO_T_EMBED_CC1101_PLUS -DCONFIG_IDF_TARGET_ESP32S3 \
"$compiler" "${common[@]}" -DESPSOMFY_LILYGO_T_EMBED_CC1101 -DCONFIG_IDF_TARGET_ESP32S3 \
"${sources[@]}" -o "$scratch/lilygo-test"
"$scratch/lilygo-test"
"$compiler" "${common[@]}" "${sources[@]}" -o "$scratch/generic-test"
@ -14,13 +14,13 @@ sources=("$repo/tests/board-profile/board-profile-test.cpp" "$repo/src/BoardProf
for profile in generic lilygo; do
flags=()
if [[ "$profile" == lilygo ]]; then
flags=(-DESPSOMFY_LILYGO_T_EMBED_CC1101_PLUS -DCONFIG_IDF_TARGET_ESP32S3)
flags=(-DESPSOMFY_LILYGO_T_EMBED_CC1101 -DCONFIG_IDF_TARGET_ESP32S3)
fi
"$compiler" "${common[@]}" "${flags[@]}" \
"$repo/tests/board-profile/shade-gpio-test.cpp" "$repo/src/BoardProfile.cpp" -o "$scratch/shade-gpio-$profile"
"$scratch/shade-gpio-$profile"
done
if "$compiler" "${common[@]}" -DESPSOMFY_LILYGO_T_EMBED_CC1101_PLUS \
if "$compiler" "${common[@]}" -DESPSOMFY_LILYGO_T_EMBED_CC1101 \
"${sources[@]}" -o "$scratch/wrong-target" > "$scratch/wrong-target.log" 2>&1; then
echo 'LILYGO profile incorrectly accepted a non-S3 target' >&2
exit 1
@ -32,7 +32,7 @@ python3 "$repo/tests/board-profile/extract-radio-setup.py" "$repo/src/Transceive
for profile in generic lilygo; do
flags=()
if [[ "$profile" == lilygo ]]; then
flags=(-DESPSOMFY_LILYGO_T_EMBED_CC1101_PLUS -DCONFIG_IDF_TARGET_ESP32S3)
flags=(-DESPSOMFY_LILYGO_T_EMBED_CC1101 -DCONFIG_IDF_TARGET_ESP32S3)
fi
"$compiler" "${common[@]}" -I"$scratch" -I"$repo/lib/SmartRC-CC1101-Driver-Lib" "${flags[@]}" \
"$repo/tests/board-profile/radio-setup-test.cpp" "$repo/src/BoardProfile.cpp" \