Move the board profile tests into the native Unity suite

The board tests ran through tools/test-board-profile.sh with their own stubs, assert() and a script that copied nine method bodies out of Transceiver.cpp, so they were outside pio test -e native and the coverage report.

Pure decisions now live in units the native env builds: BoardProfile::usesPin is constexpr, RadioReadiness decides register validity, the receive-state outcome (ready, retry or unavailable, with one try today) and whether a queued job may transmit, and ShadeGpioGuard decides whether a shade's outputs touch a board pad. Transceiver and ShadeGpio call them with identical behaviour. New Unity suites cover the generic and LILYGO profiles (reserved pads, startup order, radio bring-up) and the readiness unit; the old harness, its script, CI step and stubs are deleted.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
This commit is contained in:
R. Sid Shaytay 2026-11-14 18:46:33 -08:00
parent 2b3d556729
commit 28af01195a
No known key found for this signature in database
27 changed files with 595 additions and 517 deletions

View file

@ -10,12 +10,64 @@
#include <cstring>
#include <ctime>
#include <string>
#include <vector>
#include <type_traits>
typedef uint8_t byte;
// Fixed so anything formatted from it is deterministic.
inline unsigned long millis() { return 0; }
// Starts at 0 and only moves when a test calls delay() or sets it, so anything
// formatted from it is deterministic.
inline unsigned long stubMillis = 0;
inline unsigned long millis() { return stubMillis; }
inline void delay(unsigned long ms) { stubMillis += ms; }
// A fake GPIO bank for board code. Every pin call is also logged in order
// so tests can check the startup sequence, not only the final levels.
constexpr int LOW = 0;
constexpr int HIGH = 1;
constexpr int INPUT = 0x01;
constexpr int OUTPUT = 0x03;
struct StubGpioEvent {
enum Kind : char { Mode = 'M', Level = 'L', Write = 'W', SpiBegin = 'B', SpiEnd = 'E' };
Kind kind;
uint8_t pin;
int value;
};
inline std::vector<StubGpioEvent> stubGpioLog;
inline int stubPinLevel[64] = {};
inline int stubPinMode[64] = {};
inline int stubPinReadOverride[64] = {}; // -1 for none, set by stubGpioReset()
inline void stubGpioReset() {
stubGpioLog.clear();
for(int i = 0; i < 64; i++) { stubPinLevel[i] = 0; stubPinMode[i] = 0; stubPinReadOverride[i] = -1; }
stubMillis = 0;
}
// The ESP-IDF call that sets the output latch whatever the pin mode is.
inline void stubSetLatch(uint8_t pin, int level) {
stubPinLevel[pin] = level;
stubGpioLog.push_back({StubGpioEvent::Level, pin, level});
}
inline void pinMode(uint8_t pin, uint8_t mode) {
stubPinMode[pin] = mode;
stubGpioLog.push_back({StubGpioEvent::Mode, pin, mode});
}
// Arduino 3 only accepts writes once pinMode has made the pin an output.
inline void digitalWrite(uint8_t pin, uint8_t level) {
if(stubPinMode[pin] != OUTPUT) return;
stubPinLevel[pin] = level;
stubGpioLog.push_back({StubGpioEvent::Write, pin, level});
}
inline int digitalRead(uint8_t pin) {
return stubPinReadOverride[pin] >= 0 ? stubPinReadOverride[pin] : stubPinLevel[pin];
}
// Serial output is discarded.
struct StubSerial {
template <typename... Args> void printf(const char *, Args...) {}
void println(const char *) {}
};
inline StubSerial Serial;
// Tests that measure time set this.
inline unsigned long stubMicros = 0;
inline unsigned long micros() { return stubMicros; }