Merge pull request #25 from cjkas/scz/split-response

Memory-bounded streaming builder for /controller. Produces the JSON p…

docs/KNOWN_ISSUES.md

@@ -0,0 +1,59 @@
+# Known Issues
+
+## Concurrent mutation during chunked `/controller` response
+
+**Status:** open
+**Introduced:** 2026-04-19, alongside the chunked-response conversion of `/controller` (see [`ControllerChunker` in src/Web.cpp](../src/Web.cpp) and the original crash report about `cbuf::resize` aborting `async_tcp`).
+
+### Summary
+
+The chunked streaming of `/controller` lazily reads `somfy.rooms`, `somfy.shades`, `somfy.groups`, and `somfy.repeaters` across many `async_tcp` callback invocations as the client's TCP send window opens. If another task mutates those arrays mid-stream, the rendered JSON can be internally inconsistent.
+
+### Why this is strictly worse than the pre-chunked code
+
+The old `handleController` ran the serializers synchronously inside a single request-handler invocation, so the full JSON was built in memory *before* any bytes were sent. Window of exposure: a few milliseconds.
+
+The new `ControllerChunker` reads state as the response drains. On a slow link or under backpressure, that window is hundreds of ms to seconds.
+
+### Concrete failure modes
+
+1. A shade is deleted mid-stream (e.g. via `/deleteShade`) — it may appear in the `shades` array but be missing from a later group's `linkedShades`, or vice versa.
+2. `lastRollingCode` / position fields change between the `shades` pass and a later group's `linkedShades` pass — the client sees two values for the same shade in one document.
+3. A group's `linkedShades` list is mutated while the chunker iterates inside `S_GROUPS` — an entry is skipped or emitted twice.
+
+### Fix options (pick one later)
+
+- **(a) Document and accept.** In practice users rarely mutate shades while the config UI is loading. Zero code change.
+- **(b) FreeRTOS mutex around `somfy` reads/writes.** Acquire for the full duration of the chunked response and in every mutating path (RF RX, MQTT, web handlers). Cleanest but wide-reaching.
+- **(c) Up-front snapshot.** At handler start, copy the subset of `somfy` state the response will serialize into the `ControllerChunker`. Defeats part of the memory benefit — a full snapshot of shades + groups is close in size to the old growing cbuf. Could be reduced by snapshotting only minimal fields (IDs, names, rolling codes) and reading the rest live.
+
+### Related
+
+- Same exposure exists in any other endpoint converted to chunked responses next (`/discovery`, `/shades`). Resolve this issue before expanding the pattern.
+
+## Silent truncation of large websocket events
+
+**Status:** open
+**Location:** [`JsonSockEvent` in src/WResp.cpp](../src/WResp.cpp), buffer defined at [src/Sockets.cpp:45-46](../src/Sockets.cpp#L45-L46) as `g_response[MAX_SOCK_RESPONSE]` = 2048 bytes.
+
+### Summary
+
+Socket events are built into a fixed 2 KB static buffer. On overflow, [`JsonSockEvent::_safecat`](../src/WResp.cpp) logs an error and returns without appending — the event is sent truncated, producing malformed socket.io text that the client drops silently.
+
+Unlike the `/controller` HTTP crash, this path does **not** abort — there is no growing cbuf and no `new[]` on the send path. Per-client frame allocations inside `AsyncWebSocket` are bounded by the 2 KB buffer size and have their own overflow guard (queue drop / client disconnect).
+
+### Concrete failure modes
+
+1. A single event serializing a fully-populated shade (~1.3–1.5 KB for a shade with all `SOMFY_MAX_LINKED_REMOTES` = 7 populated) gets close to the 2 KB limit. Any additional fields or long names push it over and the JSON is silently cut mid-value.
+2. Any event that loops over a collection (e.g. frequency-scan results, batch emits in `Somfy.cpp` around lines 1870–1975) can exceed 2 KB depending on size, with no indication to the client beyond the ESP-side `ESP_LOGE` line.
+
+### Fix options (pick one later)
+
+- **(a) Fail loud.** Keep truncation but emit a sentinel/error frame so the client knows the event was lost, instead of sending a malformed one.
+- **(b) Split large events across frames.** Use the socket.io ack/chunk pattern to send an event in multiple frames when it wouldn't fit. Requires matching client-side reassembly.
+- **(c) Raise `MAX_SOCK_RESPONSE`.** Cheapest, but just pushes the limit — doesn't eliminate the failure mode.
+
+### Related
+
+- Not the same code path as the `/controller` crash. Solve independently.
+- Worth grepping for `JsonSockEvent` usages that iterate collections (see references in `Somfy.cpp`, `ESPNetwork.cpp`, `GitOTA.cpp`) to identify the most at-risk events.

src/WResp.cpp

@@ -35,6 +35,17 @@ void JsonSockEvent::_safecat(const char *val, bool escape) {
   else strcat(this->buff, val);
   if(escape) strcat(this->buff, "\"");
 }
+void BufferedJsonFormatter::setBuffer(char *b, size_t sz) {
+  this->buff = b;
+  this->buffSize = sz;
+  this->buff[0] = 0;
+  this->_nocomma = true;
+  this->_objects = 0;
+  this->_arrays = 0;
+}
+size_t BufferedJsonFormatter::length() const {
+  return strlen(this->buff);
+}
 void AsyncJsonResp::beginResponse(AsyncWebServerRequest *request, char *buff, size_t buffSize) {
   this->_request = request;
   this->buff = buff;

src/WResp.h

@@ -52,6 +52,11 @@ class JsonFormatter {
     void addElem(const char *name, const char *val);
     void addElem(const char* name, uint64_t lval);
 };
+class BufferedJsonFormatter : public JsonFormatter {
+  public:
+    void setBuffer(char *b, size_t sz);
+    size_t length() const;
+};
 class AsyncJsonResp : public JsonFormatter {
   protected:
     void _safecat(const char *val, bool escape = false) override;

src/Web.cpp

@@ -17,6 +17,7 @@
 #include <AsyncTCP.h>
 #include <ESPAsyncWebServer.h>
 #include <AsyncJson.h>
+#include <memory>
 
 extern ConfigSettings settings;
 extern SSDPClass SSDP;
@@ -418,6 +419,194 @@ static void serializeGitRelease(GitRelease *rel, JsonFormatter &json) {
   json.endObject();
 }
 
+// Memory-bounded streaming builder for /controller. Produces the JSON payload
+// one small unit at a time into a fixed 3KB buffer, so a chunked HTTP response
+// can drain it as the TCP send window allows — no growing cbuf in the async
+// response stream.
+class ControllerChunker {
+public:
+  enum : uint8_t { S_HEADER, S_ROOMS, S_SHADES, S_GROUPS, S_REPEATERS, S_DONE };
+  static constexpr uint16_t LS_OPEN = 0xFFFF;
+
+  BufferedJsonFormatter fmt;
+  char unit[3072];
+  size_t unitLen = 0;
+  size_t consumed = 0;
+  uint8_t section = S_HEADER;
+  uint16_t idx = 0;
+  uint16_t lsIdx = LS_OPEN;
+  bool firstInArray = true;
+  bool firstInLSArray = true;
+
+  size_t generate(uint8_t *out, size_t maxLen) {
+    size_t written = 0;
+    while(written < maxLen) {
+      if(consumed < unitLen) {
+        size_t n = unitLen - consumed;
+        if(n > maxLen - written) n = maxLen - written;
+        memcpy(out + written, unit + consumed, n);
+        consumed += n;
+        written += n;
+      } else {
+        produceNext();
+        if(unitLen == 0) return written;
+      }
+    }
+    return written;
+  }
+
+private:
+  void resetFmt(size_t offset = 0) {
+    unit[offset] = 0;
+    fmt.setBuffer(unit + offset, sizeof(unit) - offset);
+  }
+
+  void produceNext() {
+    consumed = 0;
+    unitLen = 0;
+    switch(section) {
+      case S_HEADER: {
+        resetFmt();
+        fmt.beginObject();
+        fmt.addElem("maxRooms", (uint8_t)SOMFY_MAX_ROOMS);
+        fmt.addElem("maxShades", (uint8_t)SOMFY_MAX_SHADES);
+        fmt.addElem("maxGroups", (uint8_t)SOMFY_MAX_GROUPS);
+        fmt.addElem("maxGroupedShades", (uint8_t)SOMFY_MAX_GROUPED_SHADES);
+        fmt.addElem("maxLinkedRemotes", (uint8_t)SOMFY_MAX_LINKED_REMOTES);
+        fmt.addElem("startingAddress", (uint32_t)somfy.startingAddress);
+        fmt.beginObject("transceiver");
+        fmt.beginObject("config");
+        serializeTransceiverConfig(fmt);
+        fmt.endObject();
+        fmt.endObject();
+        fmt.beginObject("version");
+        serializeGitVersion(fmt);
+        fmt.endObject();
+        fmt.beginArray("rooms");
+        unitLen = strlen(unit);
+        section = S_ROOMS;
+        idx = 0;
+        firstInArray = true;
+        return;
+      }
+      case S_ROOMS: {
+        while(idx < SOMFY_MAX_ROOMS && somfy.rooms[idx].roomId == 0) idx++;
+        if(idx >= SOMFY_MAX_ROOMS) {
+          strcpy(unit, "],\"shades\":[");
+          unitLen = strlen(unit);
+          section = S_SHADES;
+          idx = 0;
+          firstInArray = true;
+          return;
+        }
+        size_t pos = 0;
+        if(!firstInArray) unit[pos++] = ',';
+        resetFmt(pos);
+        fmt.beginObject();
+        serializeRoom(&somfy.rooms[idx], fmt);
+        fmt.endObject();
+        unitLen = pos + strlen(unit + pos);
+        idx++;
+        firstInArray = false;
+        return;
+      }
+      case S_SHADES: {
+        while(idx < SOMFY_MAX_SHADES && somfy.shades[idx].getShadeId() == 255) idx++;
+        if(idx >= SOMFY_MAX_SHADES) {
+          strcpy(unit, "],\"groups\":[");
+          unitLen = strlen(unit);
+          section = S_GROUPS;
+          idx = 0;
+          lsIdx = LS_OPEN;
+          firstInArray = true;
+          return;
+        }
+        size_t pos = 0;
+        if(!firstInArray) unit[pos++] = ',';
+        resetFmt(pos);
+        fmt.beginObject();
+        serializeShade(&somfy.shades[idx], fmt);
+        fmt.endObject();
+        unitLen = pos + strlen(unit + pos);
+        idx++;
+        firstInArray = false;
+        return;
+      }
+      case S_GROUPS: {
+        while(idx < SOMFY_MAX_GROUPS && somfy.groups[idx].getGroupId() == 255) idx++;
+        if(idx >= SOMFY_MAX_GROUPS) {
+          strcpy(unit, "],\"repeaters\":[");
+          unitLen = strlen(unit);
+          section = S_REPEATERS;
+          idx = 0;
+          firstInArray = true;
+          return;
+        }
+        SomfyGroup *g = &somfy.groups[idx];
+        if(lsIdx == LS_OPEN) {
+          size_t pos = 0;
+          if(!firstInArray) unit[pos++] = ',';
+          resetFmt(pos);
+          fmt.beginObject();
+          serializeGroupRef(g, fmt);
+          fmt.beginArray("linkedShades");
+          unitLen = pos + strlen(unit + pos);
+          lsIdx = 0;
+          firstInArray = false;
+          firstInLSArray = true;
+          return;
+        }
+        SomfyShade *lshade = nullptr;
+        while(lsIdx < SOMFY_MAX_GROUPED_SHADES) {
+          uint8_t sid = g->linkedShades[lsIdx];
+          if(sid > 0 && sid < 255) {
+            lshade = somfy.getShadeById(sid);
+            if(lshade) break;
+          }
+          lsIdx++;
+        }
+        if(!lshade) {
+          strcpy(unit, "]}");
+          unitLen = 2;
+          idx++;
+          lsIdx = LS_OPEN;
+          return;
+        }
+        size_t pos = 0;
+        if(!firstInLSArray) unit[pos++] = ',';
+        resetFmt(pos);
+        fmt.beginObject();
+        serializeShadeRef(lshade, fmt);
+        fmt.endObject();
+        unitLen = pos + strlen(unit + pos);
+        lsIdx++;
+        firstInLSArray = false;
+        return;
+      }
+      case S_REPEATERS: {
+        while(idx < SOMFY_MAX_REPEATERS && somfy.repeaters[idx] == 0) idx++;
+        if(idx >= SOMFY_MAX_REPEATERS) {
+          strcpy(unit, "]}");
+          unitLen = 2;
+          section = S_DONE;
+          return;
+        }
+        size_t pos = 0;
+        if(!firstInArray) unit[pos++] = ',';
+        pos += snprintf(unit + pos, sizeof(unit) - pos, "%lu", (unsigned long)somfy.repeaters[idx]);
+        unitLen = pos;
+        idx++;
+        firstInArray = false;
+        return;
+      }
+      case S_DONE:
+      default:
+        unitLen = 0;
+        return;
+    }
+  }
+};
+
 // -- Async handler implementations --
 void Web::handleDiscovery(AsyncWebServerRequest *request) {
   if(request->method() == HTTP_POST || request->method() == HTTP_GET) {
@@ -501,37 +690,12 @@ void Web::handleController(AsyncWebServerRequest *request) {
   if(!this->isAuthenticated(request)) return;
   if(request->method() == HTTP_POST || request->method() == HTTP_GET) {
     settings.printAvailHeap();
-    AsyncJsonResp resp;
+    auto state = std::make_shared<ControllerChunker>();
-    resp.beginResponse(request, g_async_content, sizeof(g_async_content));
+    AsyncWebServerResponse *response = request->beginChunkedResponse(_encoding_json,
-    resp.beginObject();
+      [state](uint8_t *buffer, size_t maxLen, size_t index) -> size_t {
-    resp.addElem("maxRooms", (uint8_t)SOMFY_MAX_ROOMS);
+        return state->generate(buffer, maxLen);
-    resp.addElem("maxShades", (uint8_t)SOMFY_MAX_SHADES);
+      });
-    resp.addElem("maxGroups", (uint8_t)SOMFY_MAX_GROUPS);
+    request->send(response);
-    resp.addElem("maxGroupedShades", (uint8_t)SOMFY_MAX_GROUPED_SHADES);
-    resp.addElem("maxLinkedRemotes", (uint8_t)SOMFY_MAX_LINKED_REMOTES);
-    resp.addElem("startingAddress", (uint32_t)somfy.startingAddress);
-    resp.beginObject("transceiver");
-    resp.beginObject("config");
-    serializeTransceiverConfig(resp);
-    resp.endObject();
-    resp.endObject();
-    resp.beginObject("version");
-    serializeGitVersion(resp);
-    resp.endObject();
-    resp.beginArray("rooms");
-    serializeRooms(resp);
-    resp.endArray();
-    resp.beginArray("shades");
-    serializeShades(resp);
-    resp.endArray();
-    resp.beginArray("groups");
-    serializeGroups(resp);
-    resp.endArray();
-    resp.beginArray("repeaters");
-    serializeRepeaters(resp);
-    resp.endArray();
-    resp.endObject();
-    resp.endResponse();
   }
   else request->send(404, _encoding_text, _response_404);
 }